HALCON Reference Manual 10.0.2
Table of Contents / Matching / Correlation-Based ClassesClassesClasses | | | Operators

get_ncc_model_paramsget_ncc_model_paramsget_ncc_model_paramsGetNccModelParamsGetNccModelParams (Operator)

Name

get_ncc_model_paramsget_ncc_model_paramsget_ncc_model_paramsGetNccModelParamsGetNccModelParams — Return the parameters of an NCC model.

Signature

get_ncc_model_params( : : ModelID : NumLevels, AngleStart, AngleExtent, AngleStep, Metric)

Herror get_ncc_model_params(const Hlong ModelID, Hlong* NumLevels, double* AngleStart, double* AngleExtent, double* AngleStep, char* Metric)

Herror T_get_ncc_model_params(const Htuple ModelID, Htuple* NumLevels, Htuple* AngleStart, Htuple* AngleExtent, Htuple* AngleStep, Htuple* Metric)

Herror get_ncc_model_params(const HTuple& ModelID, Hlong* NumLevels, double* AngleStart, double* AngleExtent, double* AngleStep, char* Metric)

Hlong HNCCModel::GetNccModelParams(HTuple* AngleStart, HTuple* AngleExtent, HTuple* AngleStep, HTuple* Metric) const

void HOperatorSetX.GetNccModelParams(
[in] VARIANT ModelID, [out] VARIANT* NumLevels, [out] VARIANT* AngleStart, [out] VARIANT* AngleExtent, [out] VARIANT* AngleStep, [out] VARIANT* Metric)

Hlong HNCCModelX.GetNccModelParams(
[out] double* AngleStart, [out] double* AngleExtent, [out] double* AngleStep, [out] BSTR* Metric)

static void HOperatorSet.GetNccModelParams(HTuple modelID, out HTuple numLevels, out HTuple angleStart, out HTuple angleExtent, out HTuple angleStep, out HTuple metric)

int HNCCModel.GetNccModelParams(out double angleStart, out double angleExtent, out double angleStep, out string metric)

Description

The operator get_ncc_model_paramsget_ncc_model_paramsget_ncc_model_paramsGetNccModelParamsGetNccModelParams returns the parameters of the NCC model ModelIDModelIDModelIDModelIDmodelID that were used to create it using create_ncc_modelcreate_ncc_modelcreate_ncc_modelCreateNccModelCreateNccModel. In particular, this output can be used to check the parameters NumLevelsNumLevelsNumLevelsNumLevelsnumLevels and AngleStepAngleStepAngleStepAngleStepangleStep if they were determined automatically during the model creation with create_ncc_modelcreate_ncc_modelcreate_ncc_modelCreateNccModelCreateNccModel. Furthermore, this output can be used to check the parameters if the model was read with read_ncc_modelread_ncc_modelread_ncc_modelReadNccModelReadNccModel.

Parallelization

Parameters

ModelIDModelIDModelIDModelIDmodelID (input_control)  ncc_model → HNCCModel, HTupleHNCCModel, HTupleHNCCModelX, VARIANTHtuple (integer) (IntPtr) (Hlong) (Hlong) (Hlong)

Handle of the model.

NumLevelsNumLevelsNumLevelsNumLevelsnumLevels (output_control)  integer → HTupleHTupleVARIANTHtuple (integer) (int / long) (Hlong) (Hlong) (Hlong)

Number of pyramid levels.

AngleStartAngleStartAngleStartAngleStartangleStart (output_control)  angle.rad → HTupleHTupleVARIANTHtuple (real) (double) (double) (double) (double)

Smallest rotation of the pattern.

AngleExtentAngleExtentAngleExtentAngleExtentangleExtent (output_control)  angle.rad → HTupleHTupleVARIANTHtuple (real) (double) (double) (double) (double)

Extent of the rotation angles.

Assertion: AngleExtent >= 0

AngleStepAngleStepAngleStepAngleStepangleStep (output_control)  angle.rad → HTupleHTupleVARIANTHtuple (real) (double) (double) (double) (double)

Step length of the angles (resolution).

Assertion: AngleStep >= 0

MetricMetricMetricMetricmetric (output_control)  string → HTupleHTupleVARIANTHtuple (string) (string) (char*) (BSTR) (char*)

Match metric.

Result

If the handle of the model is valid, the operator get_ncc_model_paramsget_ncc_model_paramsget_ncc_model_paramsGetNccModelParamsGetNccModelParams returns the value 2 (H_MSG_TRUE). If necessary an exception is raised.

Possible Predecessors

create_ncc_modelcreate_ncc_modelcreate_ncc_modelCreateNccModelCreateNccModel, read_ncc_modelread_ncc_modelread_ncc_modelReadNccModelReadNccModel

See also

find_ncc_modelfind_ncc_modelfind_ncc_modelFindNccModelFindNccModel

Module

Matching

Table of Contents / Matching / Correlation-Based ClassesClassesClasses | | | Operators
HALCON Reference Manual 10.0.2 Copyright © 1996-2011 MVTec Software GmbH