gray_erosion_rectgray_erosion_rectgray_erosion_rectGrayErosionRectGrayErosionRect (Operator)

Name

gray_erosion_rectgray_erosion_rectgray_erosion_rectGrayErosionRectGrayErosionRect — Determine the minimum gray value within a rectangle.

Signature

gray_erosion_rect(Image : ImageMin : MaskHeight, MaskWidth : )

Description

gray_erosion_rectgray_erosion_rectgray_erosion_rectGrayErosionRectGrayErosionRect calculates the minimum gray value of the input image ImageImageImageImageimage within a rectangular mask of size (MaskHeightMaskHeightMaskHeightMaskHeightmaskHeight, MaskWidthMaskWidthMaskWidthMaskWidthmaskWidth) for each image point. The resulting image is returned in ImageMinImageMinImageMinImageMinimageMin. If the parameters MaskHeightMaskHeightMaskHeightMaskHeightmaskHeight or MaskWidthMaskWidthMaskWidthMaskWidthmaskWidth are even, they are changed to the next larger odd value. At the border of the image the gray values are mirrored.

Parallelization

Supports OpenCL compute devices.
Multithreading type: reentrant (runs in parallel with non-exclusive operators).
Multithreading scope: global (may be called from any thread).
Automatically parallelized on tuple level.
Automatically parallelized on channel level.
Automatically parallelized on domain level.

Parameters

ImageImageImageImageimage (input_object) (multichannel-)image(-array) → object (byte / direction / cyclic / uint2 / int2 / int4 / real)

Image for which the minimum gray values are to be calculated.

ImageMinImageMinImageMinImageMinimageMin (output_object) (multichannel-)image(-array) → object (byte / direction / cyclic / uint2 / int2 / int4 / real)

Image containing the minimum gray values.

MaskHeightMaskHeightMaskHeightMaskHeightmaskHeight (input_control) extent.y → (integer)

Height of the filter mask.

Default value: 11

Suggested values: 3, 5, 7, 9, 11, 13, 15

Typical range of values: 3 ≤ MaskHeight MaskHeight MaskHeight MaskHeight maskHeight ≤ 511 (lin)

Minimum increment: 2

Recommended increment: 2

Restriction: odd(MaskHeight)

MaskWidthMaskWidthMaskWidthMaskWidthmaskWidth (input_control) extent.x → (integer)

Width of the filter mask.

Default value: 11

Suggested values: 3, 5, 7, 9, 11, 13, 15

Typical range of values: 3 ≤ MaskWidth MaskWidth MaskWidth MaskWidth maskWidth ≤ 511 (lin)

Minimum increment: 2

Recommended increment: 2

Restriction: odd(MaskWidth)

Result

gray_erosion_rectgray_erosion_rectgray_erosion_rectGrayErosionRectGrayErosionRect returns 2 (H_MSG_TRUE) if all parameters are correct. If the input is empty the behavior can be set via set_system('no_object_result',<Result>)set_system("no_object_result",<Result>)set_system("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>). If necessary, an exception is raised.

Module

Foundation

Table of Contents / Morphology / Gray Values

Operators

HALCON Reference Manual 10.0.2