set_shape_model_origin (Operator)

Name

set_shape_model_origin — Set the origin (reference point) of a shape model.

Synopsis

set_shape_model_origin( : : ModelID, Row, Column : )

Description

The operator set_shape_model_origin sets the origin (reference point) of the shape model ModelID to a new value. The origin is specified relative to the center of gravity of the domain (region) of the image that was used to create the shape model with create_shape_model, create_scaled_shape_model, or create_aniso_shape_model. Hence, an origin of (0,0) means that the center of gravity of the domain of the model image is used as the origin. An origin of (-20,-40) means that the origin lies to the upper left of the center of gravity.

Parameters

ModelID (input_control)	shape_model → (integer)
Handle of the model.

Row (input_control)	point.y → (real)
Row coordinate of the origin of the shape model.

Column (input_control)	point.x → (real)
Column coordinate of the origin of the shape model.

Result

If the handle of the model is valid, the operator set_shape_model_origin returns the value 2 (H_MSG_TRUE). If necessary an exception is raised.

Parallelization Information

set_shape_model_origin is processed completely exclusively without parallelization.

Possible Predecessors

create_shape_model, create_scaled_shape_model, create_aniso_shape_model, read_shape_model

Possible Successors

find_shape_model, find_scaled_shape_model, find_aniso_shape_model, find_shape_models, find_scaled_shape_models, find_aniso_shape_models, get_shape_model_origin

See also

area_center

Module

Matching