| Table of Contents / Matrix / Arithmetic | Operators |
transpose_matrix_mod — Transpose a matrix.
transpose_matrix_mod( : : MatrixID : )
The operator transpose_matrix_mod returns the transpose of the input Matrix. The input matrix is defined by the matrix handle MatrixID. The input matrix is overwritten with the result. Access to the elements of the matrix is possible e.g. with the operator get_full_matrix.
Example:
/ 3.0 1.0 -2.0 \
Matrix = | -5.0 7.0 2.0 |
\ -9.0 -4.0 1.0 /
/ 3.0 -5.0 -9.0 \
-> Matrix = | 1.0 7.0 -4.0 |
\ -2.0 2.0 1.0 /
transpose_matrix_mod modifies the content of an already existing matrix.
Matrix handle of the input matrix.
If the parameters are valid, the operator transpose_matrix_mod returns the value 2 (H_MSG_TRUE). If necessary, an exception is raised.
get_full_matrix, get_value_matrix
invert_matrix, invert_matrix_mod
David Poole: “Linear Algebra: A Modern Introduction”; Thomson;
Belmont; 2006.
Gene H. Golub, Charles F. van Loan: “Matrix Computations”; The
Johns Hopkins University Press; Baltimore and London; 1996.
Foundation
| Table of Contents / Matrix / Arithmetic | Operators |
| HALCON Reference Manual 10.0.2 | Copyright © 1996-2011 MVTec Software GmbH |