Name
read_bar_code_modelread_bar_code_modelReadBarCodeModelread_bar_code_modelReadBarCodeModelReadBarCodeModel — Read a bar code model from a file and create a new model.
The operator read_bar_code_modelread_bar_code_modelReadBarCodeModelread_bar_code_modelReadBarCodeModelReadBarCodeModel reads the bar code model from the
file FileNameFileNameFileNameFileNameFileNamefileName and creates a new model that is an identical copy of
the saved model. The parameter BarCodeHandleBarCodeHandleBarCodeHandleBarCodeHandleBarCodeHandlebarCodeHandle returns the handle
of the new model. The model file FileNameFileNameFileNameFileNameFileNamefileName must have been created
by the operator write_bar_code_modelwrite_bar_code_modelWriteBarCodeModelwrite_bar_code_modelWriteBarCodeModelWriteBarCodeModel.
The default HALCON file extension for bar code model is 'bcm'.
- Multithreading type: exclusive (runs in parallel only with independent operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
Name of the bar code model file.
Default value:
'bar_code_model.bcm'
"bar_code_model.bcm"
"bar_code_model.bcm"
"bar_code_model.bcm"
"bar_code_model.bcm"
"bar_code_model.bcm"
File extension: .bcm
Handle of the bar code model.
The operator read_bar_code_modelread_bar_code_modelReadBarCodeModelread_bar_code_modelReadBarCodeModelReadBarCodeModel returns the value 2 (H_MSG_TRUE)
if the named bar code file was found and correctly read.
Otherwise, an exception is raised.
find_bar_codefind_bar_codeFindBarCodefind_bar_codeFindBarCodeFindBarCode
create_bar_code_modelcreate_bar_code_modelCreateBarCodeModelcreate_bar_code_modelCreateBarCodeModelCreateBarCodeModel
write_bar_code_modelwrite_bar_code_modelWriteBarCodeModelwrite_bar_code_modelWriteBarCodeModelWriteBarCodeModel,
clear_bar_code_modelclear_bar_code_modelClearBarCodeModelclear_bar_code_modelClearBarCodeModelClearBarCodeModel
Bar Code