Name
clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels — Freigabe des Speichers aller Formmodelle.
Warnung
clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels ist obsolet und wird nur aus Gründen
der Rückwärtskompatibilität zur Verfügung gestellt. Neue
Applikationen sollten clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels nicht
verwenden.
clear_all_shape_models( : : : )
Herror clear_all_shape_models()
Herror T_clear_all_shape_models()
Herror clear_all_shape_models()
void ClearAllShapeModels()
clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels gibt den Speicher aller Formmodelle,
die mit create_shape_modelcreate_shape_modelCreateShapeModelcreate_shape_modelCreateShapeModelCreateShapeModel,
create_scaled_shape_modelcreate_scaled_shape_modelCreateScaledShapeModelcreate_scaled_shape_modelCreateScaledShapeModelCreateScaledShapeModel oder
create_aniso_shape_modelcreate_aniso_shape_modelCreateAnisoShapeModelcreate_aniso_shape_modelCreateAnisoShapeModelCreateAnisoShapeModel angelegt wurden, wieder frei.
Keines der Modelle kann nach dem Aufruf mehr verwendet werden.
clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels existiert ausschließlich, um die
Funktionalität zum Zurücksetzen des Programmes in HDevelop zu
implementieren. clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels darf nicht in
Applikationen verwendet werden.
- Multithreading-Typ: reentrant (läuft parallel zu nicht-exklusiven Operatoren).
- Multithreading-Bereich: global (kann von jedem Thread aufgerufen werden).
- Wird ohne Parallelisierung verarbeitet.
clear_all_shape_modelsclear_all_shape_modelsClearAllShapeModelsclear_all_shape_modelsClearAllShapeModelsClearAllShapeModels liefert immer 2 (H_MSG_TRUE) zurück.
Matching