Use the tabs on the upper right to switch to a different programming language.

Use the tabs on the upper right to switch to a different programming language.

Use the tabs on the upper right to switch to a different programming language.

Use the tabs on the upper right to switch to a different programming language.

Use the tabs on the upper right to switch to a different programming language.

dev_unmap_progdev_unmap_progDevUnmapProgdev_unmap_progDevUnmapProgDevUnmapProg (Operator)

Name

dev_unmap_progdev_unmap_progDevUnmapProgdev_unmap_progDevUnmapProgDevUnmapProg — Hide the main window.

Signature

Description

dev_unmap_progdev_unmap_progDevUnmapProgdev_unmap_progDevUnmapProgDevUnmapProg hides in MDI mode the main window and in SDI mode the program window so that it is no longer visible. It can be shown again by dev_map_progdev_map_progDevMapProgdev_map_progDevMapProgDevMapProg.

Attention: after hiding the main window there is no opportunity to enter and execute the dev_map_progdev_map_progDevMapProgdev_map_progDevMapProgDevMapProg operator. So take care that dev_unmap_progdev_unmap_progDevUnmapProgdev_unmap_progDevUnmapProgDevUnmapProg is only executed in continuous mode with a reachable dev_map_progdev_map_progDevMapProgdev_map_progDevMapProgDevMapProg operator.

Attention

This operator is not supported for code export.

Result

dev_unmap_progdev_unmap_progDevUnmapProgdev_unmap_progDevUnmapProgDevUnmapProg always returns 2 (H_MSG_TRUE).

Possible Successors

dev_map_progdev_map_progDevMapProgdev_map_progDevMapProgDevMapProg, stopstopStopstopStopStop

See also

dev_map_pardev_map_parDevMapPardev_map_parDevMapParDevMapPar, dev_map_progdev_map_progDevMapProgdev_map_progDevMapProgDevMapProg, dev_map_vardev_map_varDevMapVardev_map_varDevMapVarDevMapVar

Module

Foundation