gen_ellipse_contour_xldgen_ellipse_contour_xldGenEllipseContourXldgen_ellipse_contour_xldGenEllipseContourXldGenEllipseContourXld — Create an XLD contour that corresponds to an elliptic arc.
draw_ellipse(WindowHandle,Row,Column,Phi,Radius1,Radius2)
gen_ellipse_contour_xld(Ellipse,Row,Column,Phi,Radius1,Radius2,0,6.28319, \
'positive',1.5)
length_xld(Ellipse,Length)
* Transform StartPhi so that the start point of the ellipse actually
* intersects the line through origin at the angle StartPhi measured from
* the positive main axis
affine_trans_point_2d ([1.0,0.0,0.0,0.0,1.0*Radius2/Radius1,0.0], \
sin(StartPhi), cos(StartPhi), Qx, Qy)
StartPhiEllipse := atan2(Qx,Qy)
draw_ellipse(WindowHandle,Row,Column,Phi,Radius1,Radius2)
gen_ellipse_contour_xld(Ellipse,Row,Column,Phi,Radius1,Radius2,0,6.28319, \
'positive',1.5)
length_xld(Ellipse,Length)
* Transform StartPhi so that the start point of the ellipse actually
* intersects the line through origin at the angle StartPhi measured from
* the positive main axis
affine_trans_point_2d ([1.0,0.0,0.0,0.0,1.0*Radius2/Radius1,0.0], \
sin(StartPhi), cos(StartPhi), Qx, Qy)
StartPhiEllipse := atan2(Qx,Qy)
draw_ellipse(WindowHandle,Row,Column,Phi,Radius1,Radius2)
gen_ellipse_contour_xld(Ellipse,Row,Column,Phi,Radius1,Radius2,0,6.28319, \
'positive',1.5)
length_xld(Ellipse,Length)
* Transform StartPhi so that the start point of the ellipse actually
* intersects the line through origin at the angle StartPhi measured from
* the positive main axis
affine_trans_point_2d ([1.0,0.0,0.0,0.0,1.0*Radius2/Radius1,0.0], \
sin(StartPhi), cos(StartPhi), Qx, Qy)
StartPhiEllipse := atan2(Qx,Qy)
draw_ellipse(WindowHandle,Row,Column,Phi,Radius1,Radius2)
gen_ellipse_contour_xld(Ellipse,Row,Column,Phi,Radius1,Radius2,0,6.28319, \
'positive',1.5)
length_xld(Ellipse,Length)
* Transform StartPhi so that the start point of the ellipse actually
* intersects the line through origin at the angle StartPhi measured from
* the positive main axis
affine_trans_point_2d ([1.0,0.0,0.0,0.0,1.0*Radius2/Radius1,0.0], \
sin(StartPhi), cos(StartPhi), Qx, Qy)
StartPhiEllipse := atan2(Qx,Qy)
draw_ellipse(WindowHandle,Row,Column,Phi,Radius1,Radius2)
gen_ellipse_contour_xld(Ellipse,Row,Column,Phi,Radius1,Radius2,0,6.28319, \
'positive',1.5)
length_xld(Ellipse,Length)
* Transform StartPhi so that the start point of the ellipse actually
* intersects the line through origin at the angle StartPhi measured from
* the positive main axis
affine_trans_point_2d ([1.0,0.0,0.0,0.0,1.0*Radius2/Radius1,0.0], \
sin(StartPhi), cos(StartPhi), Qx, Qy)
StartPhiEllipse := atan2(Qx,Qy)
gen_ellipse_contour_xldgen_ellipse_contour_xldGenEllipseContourXldgen_ellipse_contour_xldGenEllipseContourXldGenEllipseContourXld returns 2 (H_MSG_TRUE) if all parameter values
are correct. If necessary, an exception is raised.