get_framegrabber_lut — Query look-up table of the image acquisition device.
The operator get_framegrabber_lut queries the look-up table (LUT) of the image acquisition device specified by AcqHandle. Note that this operation is not supported for all kinds of image acquisition devices.
For a multithreaded application the image acquisition operators (as listed in open_framegrabber) are an own group in which info_framegrabber, open_framegrabber, close_framegrabber and close_all_framegrabbers are executed exclusively.
get_framegrabber_lut runs in parallel with all non-exclusive operators inside and outside of this group.
Handle of the acquisition device to be used.
Red level of the LUT entries.
Green level of the LUT entries.
Blue level of the LUT entries.
The operator get_framegrabber_lut returns the value 2 (H_MSG_TRUE) if the image acquisition device is open.