Name
read_shape_model_3dread_shape_model_3dReadShapeModel3dread_shape_model_3dReadShapeModel3dReadShapeModel3d — Read a 3D shape model from a file.
The operator read_shape_model_3dread_shape_model_3dReadShapeModel3dread_shape_model_3dReadShapeModel3dReadShapeModel3d reads a 3D shape model, which
has been written with write_shape_model_3dwrite_shape_model_3dWriteShapeModel3dwrite_shape_model_3dWriteShapeModel3dWriteShapeModel3d, from the file
FileNameFileNameFileNameFileNameFileNamefileName. The default HALCON file extension for the 3D
shape model is 'sm3'.
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
This operator returns a handle. Note that the state of an instance of this handle type may be changed by specific operators even though the handle is used as an input parameter by those operators.
File name.
File extension: .sm3
Handle of the 3D shape model.
If the file name is valid, the operator read_shape_model_3dread_shape_model_3dReadShapeModel3dread_shape_model_3dReadShapeModel3dReadShapeModel3d
returns the value 2 (H_MSG_TRUE). If necessary an exception is raised.
find_shape_model_3dfind_shape_model_3dFindShapeModel3dfind_shape_model_3dFindShapeModel3dFindShapeModel3d,
get_shape_model_3d_paramsget_shape_model_3d_paramsGetShapeModel3dParamsget_shape_model_3d_paramsGetShapeModel3dParamsGetShapeModel3dParams
create_shape_model_3dcreate_shape_model_3dCreateShapeModel3dcreate_shape_model_3dCreateShapeModel3dCreateShapeModel3d,
clear_shape_model_3dclear_shape_model_3dClearShapeModel3dclear_shape_model_3dClearShapeModel3dClearShapeModel3d
3D Metrology