Name
gnuplot_plot_imageT_gnuplot_plot_imageGnuplotPlotImageGnuplotPlotImage — Visualize images using gnuplot.
Warning
gnuplot_plot_imagegnuplot_plot_imageGnuplotPlotImageGnuplotPlotImageGnuplotPlotImage is obsolete and is only provided for
reasons of backward compatibility.
void GnuplotPlotImage(const HObject& Image, const HTuple& GnuplotFileID, const HTuple& SamplesX, const HTuple& SamplesY, const HTuple& ViewRotX, const HTuple& ViewRotZ, const HTuple& Hidden3D)
void HGnuplot::GnuplotPlotImage(const HImage& Image, Hlong SamplesX, Hlong SamplesY, const HTuple& ViewRotX, const HTuple& ViewRotZ, const HString& Hidden3D) const
void HGnuplot::GnuplotPlotImage(const HImage& Image, Hlong SamplesX, Hlong SamplesY, double ViewRotX, double ViewRotZ, const HString& Hidden3D) const
void HGnuplot::GnuplotPlotImage(const HImage& Image, Hlong SamplesX, Hlong SamplesY, double ViewRotX, double ViewRotZ, const char* Hidden3D) const
void HImage::GnuplotPlotImage(const HGnuplot& GnuplotFileID, Hlong SamplesX, Hlong SamplesY, const HTuple& ViewRotX, const HTuple& ViewRotZ, const HString& Hidden3D) const
void HImage::GnuplotPlotImage(const HGnuplot& GnuplotFileID, Hlong SamplesX, Hlong SamplesY, double ViewRotX, double ViewRotZ, const HString& Hidden3D) const
void HImage::GnuplotPlotImage(const HGnuplot& GnuplotFileID, Hlong SamplesX, Hlong SamplesY, double ViewRotX, double ViewRotZ, const char* Hidden3D) const
static void HOperatorSet.GnuplotPlotImage(HObject image, HTuple gnuplotFileID, HTuple samplesX, HTuple samplesY, HTuple viewRotX, HTuple viewRotZ, HTuple hidden3D)
void HGnuplot.GnuplotPlotImage(HImage image, int samplesX, int samplesY, HTuple viewRotX, HTuple viewRotZ, string hidden3D)
void HGnuplot.GnuplotPlotImage(HImage image, int samplesX, int samplesY, double viewRotX, double viewRotZ, string hidden3D)
void HImage.GnuplotPlotImage(HGnuplot gnuplotFileID, int samplesX, int samplesY, HTuple viewRotX, HTuple viewRotZ, string hidden3D)
void HImage.GnuplotPlotImage(HGnuplot gnuplotFileID, int samplesX, int samplesY, double viewRotX, double viewRotZ, string hidden3D)
gnuplot_plot_imagegnuplot_plot_imageGnuplotPlotImageGnuplotPlotImageGnuplotPlotImage displays an image as a 3D-plot using
gnuplot. If there is an active gnuplot sub-process (started with
gnuplot_open_pipegnuplot_open_pipeGnuplotOpenPipeGnuplotOpenPipeGnuplotOpenPipe), the image is displayed in a gnuplot
window. Otherwise, the image is output to a file, which can be
later read by gnuplot. In both cases the gnuplot output stream is
identified by GnuplotFileIDGnuplotFileIDGnuplotFileIDGnuplotFileIDgnuplotFileID. The parameters
SamplesXSamplesXSamplesXSamplesXsamplesX and SamplesYSamplesYSamplesYSamplesYsamplesY determine the number of
data points in the x- and y-direction, respectively, which gnuplot
should use to display the image. They are the equivalent of the
gnuplot variables samples and isosamples. The parameters
ViewRotXViewRotXViewRotXViewRotXviewRotX and ViewRotZViewRotZViewRotZViewRotZviewRotZ determine the rotation
of the plot with respect to the viewer. ViewRotXViewRotXViewRotXViewRotXviewRotX is the
rotation of the coordinate system about the x-axis, while
ViewRotZViewRotZViewRotZViewRotZviewRotZ is the rotation of the plot about the z-axis.
These two parameters correspond directly to the first two parameters
of the 'set view' command in gnuplot. The parameter
Hidden3DHidden3DHidden3DHidden3Dhidden3D determines whether hidden surfaces should be
removed. This is equivalent to the 'set hidden3d' command in
gnuplot. If a single image is passed to the operator, it is
displayed in a separate plot. If multiple images are passed, they
are displayed in the same plot.
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
Identifier for the gnuplot output stream.
Number of samples in the x-direction.
Default value: 64
Typical range of values: 2
≤
SamplesX
SamplesX
SamplesX
SamplesX
samplesX
≤
10000
Restriction: SamplesX >= 2
Number of samples in the y-direction.
Default value: 64
Typical range of values: 2
≤
SamplesY
SamplesY
SamplesY
SamplesY
samplesY
≤
10000
Restriction: SamplesY >= 2
Rotation of the plot about the x-axis.
Default value: 60
Typical range of values: 0
≤
ViewRotX
ViewRotX
ViewRotX
ViewRotX
viewRotX
≤
180
Minimum increment: 0.01
Recommended increment: 10
Restriction: 0 <= ViewRotX && ViewRotX <= 180
Rotation of the plot about the z-axis.
Default value: 30
Typical range of values: 0
≤
ViewRotZ
ViewRotZ
ViewRotZ
ViewRotZ
viewRotZ
≤
360
Minimum increment: 0.01
Recommended increment: 10
Restriction: 0 <= ViewRotZ && ViewRotZ <= 360
Plot the image with hidden surfaces removed.
Default value:
'hidden3d'
"hidden3d"
"hidden3d"
"hidden3d"
"hidden3d"
List of values: 'hidden3d'"hidden3d""hidden3d""hidden3d""hidden3d", 'nohidden3d'"nohidden3d""nohidden3d""nohidden3d""nohidden3d"
gnuplot_plot_imagegnuplot_plot_imageGnuplotPlotImageGnuplotPlotImageGnuplotPlotImage returns the value if
GnuplotFileIDGnuplotFileIDGnuplotFileIDGnuplotFileIDgnuplotFileID is a valid gnuplot output stream, and if
the data file for the current plot could be opened. Otherwise, an
exception is raised.
gnuplot_open_pipegnuplot_open_pipeGnuplotOpenPipeGnuplotOpenPipeGnuplotOpenPipe,
gnuplot_open_filegnuplot_open_fileGnuplotOpenFileGnuplotOpenFileGnuplotOpenFile
gnuplot_closegnuplot_closeGnuplotCloseGnuplotCloseGnuplotClose
gnuplot_open_pipegnuplot_open_pipeGnuplotOpenPipeGnuplotOpenPipeGnuplotOpenPipe,
gnuplot_open_filegnuplot_open_fileGnuplotOpenFileGnuplotOpenFileGnuplotOpenFile,
gnuplot_closegnuplot_closeGnuplotCloseGnuplotCloseGnuplotClose
Foundation