ClassesClasses | | Operators

proj_match_points_ransacT_proj_match_points_ransacProjMatchPointsRansacProjMatchPointsRansac (Operator)

Name

proj_match_points_ransacT_proj_match_points_ransacProjMatchPointsRansacProjMatchPointsRansac — Compute a projective transformation matrix between two images by finding correspondences between points.

Signature

proj_match_points_ransac(Image1, Image2 : : Rows1, Cols1, Rows2, Cols2, GrayMatchMethod, MaskSize, RowMove, ColMove, RowTolerance, ColTolerance, Rotation, MatchThreshold, EstimationMethod, DistanceThreshold, RandSeed : HomMat2D, Points1, Points2)

Herror T_proj_match_points_ransac(const Hobject Image1, const Hobject Image2, const Htuple Rows1, const Htuple Cols1, const Htuple Rows2, const Htuple Cols2, const Htuple GrayMatchMethod, const Htuple MaskSize, const Htuple RowMove, const Htuple ColMove, const Htuple RowTolerance, const Htuple ColTolerance, const Htuple Rotation, const Htuple MatchThreshold, const Htuple EstimationMethod, const Htuple DistanceThreshold, const Htuple RandSeed, Htuple* HomMat2D, Htuple* Points1, Htuple* Points2)

void ProjMatchPointsRansac(const HObject& Image1, const HObject& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HTuple& GrayMatchMethod, const HTuple& MaskSize, const HTuple& RowMove, const HTuple& ColMove, const HTuple& RowTolerance, const HTuple& ColTolerance, const HTuple& Rotation, const HTuple& MatchThreshold, const HTuple& EstimationMethod, const HTuple& DistanceThreshold, const HTuple& RandSeed, HTuple* HomMat2D, HTuple* Points1, HTuple* Points2)

HHomMat2D HImage::ProjMatchPointsRansac(const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, Hlong RowMove, Hlong ColMove, Hlong RowTolerance, Hlong ColTolerance, const HTuple& Rotation, const HTuple& MatchThreshold, const HString& EstimationMethod, double DistanceThreshold, Hlong RandSeed, HTuple* Points1, HTuple* Points2) const

HHomMat2D HImage::ProjMatchPointsRansac(const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, Hlong RowMove, Hlong ColMove, Hlong RowTolerance, Hlong ColTolerance, double Rotation, Hlong MatchThreshold, const HString& EstimationMethod, double DistanceThreshold, Hlong RandSeed, HTuple* Points1, HTuple* Points2) const

HHomMat2D HImage::ProjMatchPointsRansac(const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const char* GrayMatchMethod, Hlong MaskSize, Hlong RowMove, Hlong ColMove, Hlong RowTolerance, Hlong ColTolerance, double Rotation, Hlong MatchThreshold, const char* EstimationMethod, double DistanceThreshold, Hlong RandSeed, HTuple* Points1, HTuple* Points2) const

HTuple HHomMat2D::ProjMatchPointsRansac(const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, Hlong RowMove, Hlong ColMove, Hlong RowTolerance, Hlong ColTolerance, const HTuple& Rotation, const HTuple& MatchThreshold, const HString& EstimationMethod, double DistanceThreshold, Hlong RandSeed, HTuple* Points2)

HTuple HHomMat2D::ProjMatchPointsRansac(const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, Hlong RowMove, Hlong ColMove, Hlong RowTolerance, Hlong ColTolerance, double Rotation, Hlong MatchThreshold, const HString& EstimationMethod, double DistanceThreshold, Hlong RandSeed, HTuple* Points2)

HTuple HHomMat2D::ProjMatchPointsRansac(const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const char* GrayMatchMethod, Hlong MaskSize, Hlong RowMove, Hlong ColMove, Hlong RowTolerance, Hlong ColTolerance, double Rotation, Hlong MatchThreshold, const char* EstimationMethod, double DistanceThreshold, Hlong RandSeed, HTuple* Points2)

static void HOperatorSet.ProjMatchPointsRansac(HObject image1, HObject image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, HTuple grayMatchMethod, HTuple maskSize, HTuple rowMove, HTuple colMove, HTuple rowTolerance, HTuple colTolerance, HTuple rotation, HTuple matchThreshold, HTuple estimationMethod, HTuple distanceThreshold, HTuple randSeed, out HTuple homMat2D, out HTuple points1, out HTuple points2)

HHomMat2D HImage.ProjMatchPointsRansac(HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, int rowMove, int colMove, int rowTolerance, int colTolerance, HTuple rotation, HTuple matchThreshold, string estimationMethod, double distanceThreshold, int randSeed, out HTuple points1, out HTuple points2)

HHomMat2D HImage.ProjMatchPointsRansac(HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, int rowMove, int colMove, int rowTolerance, int colTolerance, double rotation, int matchThreshold, string estimationMethod, double distanceThreshold, int randSeed, out HTuple points1, out HTuple points2)

HTuple HHomMat2D.ProjMatchPointsRansac(HImage image1, HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, int rowMove, int colMove, int rowTolerance, int colTolerance, HTuple rotation, HTuple matchThreshold, string estimationMethod, double distanceThreshold, int randSeed, out HTuple points2)

HTuple HHomMat2D.ProjMatchPointsRansac(HImage image1, HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, int rowMove, int colMove, int rowTolerance, int colTolerance, double rotation, int matchThreshold, string estimationMethod, double distanceThreshold, int randSeed, out HTuple points2)

Description

Given a set of coordinates of characteristic points (Cols1Cols1Cols1Cols1cols1,Rows1Rows1Rows1Rows1rows1) and (Cols2Cols2Cols2Cols2cols2,Rows2Rows2Rows2Rows2rows2) in both input images Image1Image1Image1Image1image1 and Image2Image2Image2Image2image2, proj_match_points_ransacproj_match_points_ransacProjMatchPointsRansacProjMatchPointsRansacProjMatchPointsRansac automatically determines corresponding points and the homogeneous projective transformation matrix HomMat2DHomMat2DHomMat2DHomMat2DhomMat2D that best transforms the corresponding points from the different images into each other. The characteristic points can, for example, be extracted with points_foerstnerpoints_foerstnerPointsFoerstnerPointsFoerstnerPointsFoerstner or points_harrispoints_harrisPointsHarrisPointsHarrisPointsHarris.

The transformation is determined in two steps: First, gray value correlations of mask windows around the input points in the first and the second image are determined and an initial matching between them is generated using the similarity of the windows in both images.

The size of the mask windows is MaskSizeMaskSizeMaskSizeMaskSizemaskSize x MaskSizeMaskSizeMaskSizeMaskSizemaskSize. Three metrics for the correlation can be selected. If GrayMatchMethodGrayMatchMethodGrayMatchMethodGrayMatchMethodgrayMatchMethod has the value 'ssd'"ssd""ssd""ssd""ssd", the sum of the squared gray value differences is used, 'sad'"sad""sad""sad""sad" means the sum of absolute differences, and 'ncc'"ncc""ncc""ncc""ncc" is the normalized cross correlation. For details please refer to binocular_disparitybinocular_disparityBinocularDisparityBinocularDisparityBinocularDisparity. The metric is minimized ('ssd'"ssd""ssd""ssd""ssd", 'sad'"sad""sad""sad""sad") or maximized ('ncc'"ncc""ncc""ncc""ncc") over all possible point pairs. A thus found matching is only accepted if the value of the metric is below the value of MatchThresholdMatchThresholdMatchThresholdMatchThresholdmatchThreshold ('ssd'"ssd""ssd""ssd""ssd", 'sad'"sad""sad""sad""sad") or above that value ('ncc'"ncc""ncc""ncc""ncc").

To increase the algorithm's performance, the search area for the matchings can be limited. Only points within a window of points are considered. The offset of the center of the search window in the second image with respect to the position of the current point in the first image is given by RowMoveRowMoveRowMoveRowMoverowMove and ColMoveColMoveColMoveColMovecolMove.

If the transformation contains a rotation, i.e., if the first image is rotated with respect to the second image, the parameter RotationRotationRotationRotationrotation may contain an estimate for the rotation angle or an angle interval in radians. A good guess will increase the quality of the gray value matching. If the actual rotation differs too much from the specified estimate the matching will typically fail. The larger the given interval, the slower the operator is since the entire algorithm is run for all relevant angles within the interval.

Once the initial matching is complete, a randomized search algorithm (RANSAC) is used to determine the transformation matrix HomMat2DHomMat2DHomMat2DHomMat2DhomMat2D. It tries to find the matrix that is consistent with a maximum number of correspondences. For a point to be accepted, its distance from the coordinates predicted by the transformation must not exceed the threshold DistanceThresholdDistanceThresholdDistanceThresholdDistanceThresholddistanceThreshold.

Once a choice has been made, the matrix is further optimized using all consistent points. For this optimization, the EstimationMethodEstimationMethodEstimationMethodEstimationMethodestimationMethod can be chosen to either be the slow but mathematically optimal 'gold_standard'"gold_standard""gold_standard""gold_standard""gold_standard" method or the faster 'normalized_dlt'"normalized_dlt""normalized_dlt""normalized_dlt""normalized_dlt". Here, the algorithms of vector_to_proj_hom_mat2dvector_to_proj_hom_mat2dVectorToProjHomMat2dVectorToProjHomMat2dVectorToProjHomMat2d are used.

Point pairs that still violate the consistency condition for the final transformation are dropped, the matched points are returned as control values. Points1Points1Points1Points1points1 contains the indices of the matched input points from the first image, Points2Points2Points2Points2points2 contains the indices of the corresponding points in the second image.

The parameter RandSeedRandSeedRandSeedRandSeedrandSeed can be used to control the randomized nature of the RANSAC algorithm, and hence to obtain reproducible results. If RandSeedRandSeedRandSeedRandSeedrandSeed is set to a positive number, the operator yields the same result on every call with the same parameters because the internally used random number generator is initialized with the seed value. If RandSeedRandSeedRandSeedRandSeedrandSeed = 0, the random number generator is initialized with the current time. Hence, the results may not be reproducible in this case.

Execution Information

Parameters

Image1Image1Image1Image1image1 (input_object)  singlechannelimage objectHImageHImageHobject (byte / uint2)

Input image 1.

Image2Image2Image2Image2image2 (input_object)  singlechannelimage objectHImageHImageHobject (byte / uint2)

Input image 2.

Rows1Rows1Rows1Rows1rows1 (input_control)  point.x-array HTupleHTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Row coordinates of characteristic points in image 1.

Cols1Cols1Cols1Cols1cols1 (input_control)  point.y-array HTupleHTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Column coordinates of characteristic points in image 1.

Rows2Rows2Rows2Rows2rows2 (input_control)  point.x-array HTupleHTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Row coordinates of characteristic points in image 2.

Cols2Cols2Cols2Cols2cols2 (input_control)  point.y-array HTupleHTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Column coordinates of characteristic points in image 2.

GrayMatchMethodGrayMatchMethodGrayMatchMethodGrayMatchMethodgrayMatchMethod (input_control)  string HTupleHTupleHtuple (string) (string) (HString) (char*)

Gray value comparison metric.

Default value: 'ssd' "ssd" "ssd" "ssd" "ssd"

List of values: 'ncc'"ncc""ncc""ncc""ncc", 'sad'"sad""sad""sad""sad", 'ssd'"ssd""ssd""ssd""ssd"

MaskSizeMaskSizeMaskSizeMaskSizemaskSize (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Size of gray value masks.

Default value: 10

Typical range of values: MaskSize MaskSize MaskSize MaskSize maskSize ≤ 90

RowMoveRowMoveRowMoveRowMoverowMove (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Average row coordinate shift.

Default value: 0

ColMoveColMoveColMoveColMovecolMove (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Average column coordinate shift.

Default value: 0

RowToleranceRowToleranceRowToleranceRowTolerancerowTolerance (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Half height of matching search window.

Default value: 256

ColToleranceColToleranceColToleranceColTolerancecolTolerance (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Half width of matching search window.

Default value: 256

RotationRotationRotationRotationrotation (input_control)  real(-array) HTupleHTupleHtuple (real) (double) (double) (double)

Range of rotation angles.

Default value: 0.0

Suggested values: 0.0, 0.7854, 1.571, 3.142

MatchThresholdMatchThresholdMatchThresholdMatchThresholdmatchThreshold (input_control)  number HTupleHTupleHtuple (integer / real) (int / long / double) (Hlong / double) (Hlong / double)

Threshold for gray value matching.

Default value: 10

Suggested values: 10, 20, 50, 100, 0.9, 0.7

EstimationMethodEstimationMethodEstimationMethodEstimationMethodestimationMethod (input_control)  string HTupleHTupleHtuple (string) (string) (HString) (char*)

Transformation matrix estimation algorithm.

Default value: 'normalized_dlt' "normalized_dlt" "normalized_dlt" "normalized_dlt" "normalized_dlt"

List of values: 'gold_standard'"gold_standard""gold_standard""gold_standard""gold_standard", 'normalized_dlt'"normalized_dlt""normalized_dlt""normalized_dlt""normalized_dlt"

DistanceThresholdDistanceThresholdDistanceThresholdDistanceThresholddistanceThreshold (input_control)  real HTupleHTupleHtuple (real) (double) (double) (double)

Threshold for transformation consistency check.

Default value: 0.2

RandSeedRandSeedRandSeedRandSeedrandSeed (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Seed for the random number generator.

Default value: 0

HomMat2DHomMat2DHomMat2DHomMat2DhomMat2D (output_control)  hom_mat2d HHomMat2D, HTupleHTupleHtuple (real) (double) (double) (double)

Homogeneous projective transformation matrix.

Points1Points1Points1Points1points1 (output_control)  integer-array HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Indices of matched input points in image 1.

Points2Points2Points2Points2points2 (output_control)  integer-array HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Indices of matched input points in image 2.

Possible Predecessors

points_foerstnerpoints_foerstnerPointsFoerstnerPointsFoerstnerPointsFoerstner, points_harrispoints_harrisPointsHarrisPointsHarrisPointsHarris

Possible Successors

projective_trans_imageprojective_trans_imageProjectiveTransImageProjectiveTransImageProjectiveTransImage, projective_trans_image_sizeprojective_trans_image_sizeProjectiveTransImageSizeProjectiveTransImageSizeProjectiveTransImageSize, projective_trans_regionprojective_trans_regionProjectiveTransRegionProjectiveTransRegionProjectiveTransRegion, projective_trans_contour_xldprojective_trans_contour_xldProjectiveTransContourXldProjectiveTransContourXldProjectiveTransContourXld, projective_trans_point_2dprojective_trans_point_2dProjectiveTransPoint2dProjectiveTransPoint2dProjectiveTransPoint2d, projective_trans_pixelprojective_trans_pixelProjectiveTransPixelProjectiveTransPixelProjectiveTransPixel

Alternatives

hom_vector_to_proj_hom_mat2dhom_vector_to_proj_hom_mat2dHomVectorToProjHomMat2dHomVectorToProjHomMat2dHomVectorToProjHomMat2d, vector_to_proj_hom_mat2dvector_to_proj_hom_mat2dVectorToProjHomMat2dVectorToProjHomMat2dVectorToProjHomMat2d

See also

proj_match_points_ransac_guidedproj_match_points_ransac_guidedProjMatchPointsRansacGuidedProjMatchPointsRansacGuidedProjMatchPointsRansacGuided

References

Richard Hartley, Andrew Zisserman: “Multiple View Geometry in Computer Vision”; Cambridge University Press, Cambridge; 2000.
Olivier Faugeras, Quang-Tuan Luong: “The Geometry of Multiple Images: The Laws That Govern the Formation of Multiple Images of a Scene and Some of Their Applications”; MIT Press, Cambridge, MA; 2001.

Module

Matching


ClassesClasses | | Operators