get_framegrabber_lutT_get_framegrabber_lutGetFramegrabberLutGetFramegrabberLut (Operator)

Name

get_framegrabber_lutT_get_framegrabber_lutGetFramegrabberLutGetFramegrabberLut — Query look-up table of the image acquisition device.

Signature

get_framegrabber_lut( : : AcqHandle : ImageRed, ImageGreen, ImageBlue)

Herror T_get_framegrabber_lut(const Htuple AcqHandle, Htuple* ImageRed, Htuple* ImageGreen, Htuple* ImageBlue)

void GetFramegrabberLut(const HTuple& AcqHandle, HTuple* ImageRed, HTuple* ImageGreen, HTuple* ImageBlue)

void HFramegrabber::GetFramegrabberLut(HTuple* ImageRed, HTuple* ImageGreen, HTuple* ImageBlue) const

static void HOperatorSet.GetFramegrabberLut(HTuple acqHandle, out HTuple imageRed, out HTuple imageGreen, out HTuple imageBlue)

void HFramegrabber.GetFramegrabberLut(out HTuple imageRed, out HTuple imageGreen, out HTuple imageBlue)

Description

The operator get_framegrabber_lutget_framegrabber_lutGetFramegrabberLutGetFramegrabberLutGetFramegrabberLut queries the look-up table (LUT) of the image acquisition device specified by AcqHandleAcqHandleAcqHandleAcqHandleacqHandle. Note that this operation is not supported for all kinds of image acquisition devices.

Attention

For a multithreaded application the image acquisition operators (as listed in open_framegrabberopen_framegrabberOpenFramegrabberOpenFramegrabberOpenFramegrabber) are an own group in which info_framegrabberinfo_framegrabberInfoFramegrabberInfoFramegrabberInfoFramegrabber, open_framegrabberopen_framegrabberOpenFramegrabberOpenFramegrabberOpenFramegrabber, close_framegrabberclose_framegrabberCloseFramegrabberCloseFramegrabberCloseFramegrabber and close_all_framegrabbersclose_all_framegrabbersCloseAllFramegrabbersCloseAllFramegrabbersCloseAllFramegrabbers are executed exclusively.

get_framegrabber_lutget_framegrabber_lutGetFramegrabberLutGetFramegrabberLutGetFramegrabberLut runs in parallel with all non-exclusive operators inside and outside of this group.

Execution Information

Parameters

AcqHandleAcqHandleAcqHandleAcqHandleacqHandle (input_control)  framegrabber HFramegrabber, HTupleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)

Handle of the acquisition device to be used.

ImageRedImageRedImageRedImageRedimageRed (output_control)  integer-array HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Red level of the LUT entries.

ImageGreenImageGreenImageGreenImageGreenimageGreen (output_control)  integer-array HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Green level of the LUT entries.

ImageBlueImageBlueImageBlueImageBlueimageBlue (output_control)  integer-array HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Blue level of the LUT entries.

Result

The operator get_framegrabber_lutget_framegrabber_lutGetFramegrabberLutGetFramegrabberLutGetFramegrabberLut returns the value 2 (H_MSG_TRUE) if the image acquisition device is open.

Possible Predecessors

open_framegrabberopen_framegrabberOpenFramegrabberOpenFramegrabberOpenFramegrabber

Possible Successors

set_framegrabber_lutset_framegrabber_lutSetFramegrabberLutSetFramegrabberLutSetFramegrabberLut

See also

set_framegrabber_lutset_framegrabber_lutSetFramegrabberLutSetFramegrabberLutSetFramegrabberLut, open_framegrabberopen_framegrabberOpenFramegrabberOpenFramegrabberOpenFramegrabber

Module

Foundation