mult_imagemult_imageMultImageMultImage (Operator)

Name

mult_imagemult_imageMultImageMultImage — Multiply two images.

Signature

mult_image(Image1, Image2 : ImageResult : Mult, Add : )

Herror mult_image(const Hobject Image1, const Hobject Image2, Hobject* ImageResult, double Mult, double Add)

Herror T_mult_image(const Hobject Image1, const Hobject Image2, Hobject* ImageResult, const Htuple Mult, const Htuple Add)

void MultImage(const HObject& Image1, const HObject& Image2, HObject* ImageResult, const HTuple& Mult, const HTuple& Add)

HImage HImage::MultImage(const HImage& Image2, const HTuple& Mult, const HTuple& Add) const

HImage HImage::MultImage(const HImage& Image2, double Mult, double Add) const

static void HOperatorSet.MultImage(HObject image1, HObject image2, out HObject imageResult, HTuple mult, HTuple add)

HImage HImage.MultImage(HImage image2, HTuple mult, HTuple add)

HImage HImage.MultImage(HImage image2, double mult, double add)

Description

mult_imagemult_imageMultImageMultImageMultImage multiplies two images. The gray values (g1,g2) of the input images (Image1Image1Image1Image1image1) are transformed as follows: g' := g1 * g2 * Mult + Add If an overflow or an underflow occurs the values are clipped. Note that this is not the case with cyclic and direction images.

Several images can be processed in one call. In this case both input parameters contain the same number of images which are then processed in pairs. An output image is generated for every pair.

mult_imagemult_imageMultImageMultImageMultImage can be executed on an OpenCL device for byte, int1, int2, uint2, int4, real, direction, cyclic, and complex images. However, since for OpenCL 1.0 only single precision floating point is supported for all devices, and not all rounding modes are supported, the OpenCL implementation can produce slightly different results from the scalar implementation.

Execution Information

Parameters

Image1Image1Image1Image1image1 (input_object)  (multichannel-)image(-array) objectHImageHImageHobject (byte* / int1* / int2* / uint2* / int4* / int8 / real* / direction* / cyclic* / complex*) *allowed for compute devices

Image(s) 1.

Image2Image2Image2Image2image2 (input_object)  (multichannel-)image(-array) objectHImageHImageHobject (byte* / int1* / int2* / uint2* / int4* / int8 / real* / direction* / cyclic* / complex*) *allowed for compute devices

Image(s) 2.

ImageResultImageResultImageResultImageResultimageResult (output_object)  (multichannel-)image(-array) objectHImageHImageHobject * (byte / int1 / int2 / uint2 / int4 / int8 / real / direction / cyclic / complex)

Result image(s) by the product.

MultMultMultMultmult (input_control)  number HTupleHTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Factor for gray range adaption.

Default value: 0.005

Suggested values: 0.001, 0.01, 0.5, 1.0, 2.0, 3.0, 5.0, 10.0

Typical range of values: -255.0 ≤ Mult Mult Mult Mult mult ≤ 255.0

Minimum increment: 0.001

Recommended increment: 0.1

AddAddAddAddadd (input_control)  number HTupleHTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Value for gray range adaption.

Default value: 0

Suggested values: 0.0, 128.0, 256.0

Typical range of values: -512.0 ≤ Add Add Add Add add ≤ 512.0

Minimum increment: 0.01

Recommended increment: 1.0

Example (HDevelop)

read_image(Image1,'fabrik')
dev_display (Image1)
read_image(Image2,'monkey')
dev_display (Image2)
mult_image (Image1, Image2, Result, 0.01, 10)
dev_display (Result)

Example (C)

read_image(&Image1,"fabrik");
disp_image(Image1,WindowHandle);
read_image(&Image2,"monkey");
disp_image(Image2,WindowHandle);
mult_image(Image1,Image2,&Result,0.01,10.0);
disp_image(Result,WindowHandle);

Example (HDevelop)

read_image(Image1,'fabrik')
dev_display (Image1)
read_image(Image2,'monkey')
dev_display (Image2)
mult_image (Image1, Image2, Result, 0.01, 10)
dev_display (Result)

Example (HDevelop)

read_image(Image1,'fabrik')
dev_display (Image1)
read_image(Image2,'monkey')
dev_display (Image2)
mult_image (Image1, Image2, Result, 0.01, 10)
dev_display (Result)

Example (HDevelop)

read_image(Image1,'fabrik')
dev_display (Image1)
read_image(Image2,'monkey')
dev_display (Image2)
mult_image (Image1, Image2, Result, 0.01, 10)
dev_display (Result)

Result

The operator mult_imagemult_imageMultImageMultImageMultImage returns the value 2 (H_MSG_TRUE) if the parameters are correct. The behavior in case of empty input (no input images available) is set via the operator set_system(::'no_object_result',<Result>:)set_system("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>) If necessary an exception is raised.

Alternatives

add_imageadd_imageAddImageAddImageAddImage, sub_imagesub_imageSubImageSubImageSubImage, div_imagediv_imageDivImageDivImageDivImage

See also

add_imageadd_imageAddImageAddImageAddImage, sub_imagesub_imageSubImageSubImageSubImage, div_imagediv_imageDivImageDivImageDivImage

Module

Foundation