clear_deformable_modelT_clear_deformable_modelClearDeformableModelClearDeformableModel (Operator)

Name

clear_deformable_modelT_clear_deformable_modelClearDeformableModelClearDeformableModel — Freigabe des Speichers eines deformierbaren Formmodells.

Signatur

clear_deformable_model( : : ModelID : )

Herror T_clear_deformable_model(const Htuple ModelID)

void ClearDeformableModel(const HTuple& ModelID)

static void HDeformableModel::ClearDeformableModel(const HDeformableModelArray& ModelID)

void HDeformableModel::ClearDeformableModel() const

static void HOperatorSet.ClearDeformableModel(HTuple modelID)

static void HDeformableModel.ClearDeformableModel(HDeformableModel[] modelID)

void HDeformableModel.ClearDeformableModel()

Beschreibung

clear_deformable_modelclear_deformable_modelClearDeformableModelClearDeformableModelClearDeformableModel gibt den Speicher eines deformierbaren Formmodells, das mit create_planar_uncalib_deformable_modelcreate_planar_uncalib_deformable_modelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModel oder create_planar_calib_deformable_modelcreate_planar_calib_deformable_modelCreatePlanarCalibDeformableModelCreatePlanarCalibDeformableModelCreatePlanarCalibDeformableModel angelegt wurde, wieder frei. Das Modell kann nach dem Aufruf nicht mehr verwendet werden. Der Handle ModelIDModelIDModelIDModelIDmodelID ist nach dem Aufruf ungültig.

Ausführungsinformationen

Dieser Operator modifiziert den Zustand des folgenden Eingabeparameters:

Während der Ausführung dieses Operators muss der Zugriff auf den Wert dieses Parameters synchronisiert werden, wenn er über mehrere Threads hinweg verwendet wird.

Parameter

ModelIDModelIDModelIDModelIDmodelID (input_control, Zustand wird modifiziert)  deformable_model(-array) HDeformableModel, HTupleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)

Handle des Modells.

Ergebnis

Sind die Parameterwerte korrekt, dann liefert clear_deformable_modelclear_deformable_modelClearDeformableModelClearDeformableModelClearDeformableModel den Wert 2 (H_MSG_TRUE). Gegebenenfalls wird eine Fehlerbehandlung durchgeführt.

Siehe auch

create_planar_uncalib_deformable_modelcreate_planar_uncalib_deformable_modelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModel, create_planar_calib_deformable_modelcreate_planar_calib_deformable_modelCreatePlanarCalibDeformableModelCreatePlanarCalibDeformableModelCreatePlanarCalibDeformableModel, create_local_deformable_modelcreate_local_deformable_modelCreateLocalDeformableModelCreateLocalDeformableModelCreateLocalDeformableModel

Modul

Matching