create_local_deformable_model_xldT_create_local_deformable_model_xldCreateLocalDeformableModelXldCreateLocalDeformableModelXld (Operator)

Name

create_local_deformable_model_xldT_create_local_deformable_model_xldCreateLocalDeformableModelXldCreateLocalDeformableModelXld — Prepare a deformable model for local deformable matching from XLD contours.

Signature

create_local_deformable_model_xld(Contours : : NumLevels, AngleStart, AngleExtent, AngleStep, ScaleRMin, ScaleRMax, ScaleRStep, ScaleCMin, ScaleCMax, ScaleCStep, Optimization, Metric, MinContrast, GenParamName, GenParamValue : ModelID)

Herror T_create_local_deformable_model_xld(const Hobject Contours, const Htuple NumLevels, const Htuple AngleStart, const Htuple AngleExtent, const Htuple AngleStep, const Htuple ScaleRMin, const Htuple ScaleRMax, const Htuple ScaleRStep, const Htuple ScaleCMin, const Htuple ScaleCMax, const Htuple ScaleCStep, const Htuple Optimization, const Htuple Metric, const Htuple MinContrast, const Htuple GenParamName, const Htuple GenParamValue, Htuple* ModelID)

void CreateLocalDeformableModelXld(const HObject& Contours, const HTuple& NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, const HTuple& AngleStep, const HTuple& ScaleRMin, const HTuple& ScaleRMax, const HTuple& ScaleRStep, const HTuple& ScaleCMin, const HTuple& ScaleCMax, const HTuple& ScaleCStep, const HTuple& Optimization, const HTuple& Metric, const HTuple& MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue, HTuple* ModelID)

void HDeformableModel::CreateLocalDeformableModelXld(const HXLDCont& Contours, const HTuple& NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, const HTuple& AngleStep, double ScaleRMin, const HTuple& ScaleRMax, const HTuple& ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, const HTuple& ScaleCStep, const HTuple& Optimization, const HString& Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue)

void HDeformableModel::CreateLocalDeformableModelXld(const HXLDCont& Contours, Hlong NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, double AngleStep, double ScaleRMin, const HTuple& ScaleRMax, double ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, double ScaleCStep, const HString& Optimization, const HString& Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue)

void HDeformableModel::CreateLocalDeformableModelXld(const HXLDCont& Contours, Hlong NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, double AngleStep, double ScaleRMin, const HTuple& ScaleRMax, double ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, double ScaleCStep, const char* Optimization, const char* Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue)

void HDeformableModel::CreateLocalDeformableModelXld(const HXLDCont& Contours, Hlong NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, double AngleStep, double ScaleRMin, const HTuple& ScaleRMax, double ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, double ScaleCStep, const wchar_t* Optimization, const wchar_t* Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue)   (Windows only)

HDeformableModel HXLDCont::CreateLocalDeformableModelXld(const HTuple& NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, const HTuple& AngleStep, double ScaleRMin, const HTuple& ScaleRMax, const HTuple& ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, const HTuple& ScaleCStep, const HTuple& Optimization, const HString& Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue) const

HDeformableModel HXLDCont::CreateLocalDeformableModelXld(Hlong NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, double AngleStep, double ScaleRMin, const HTuple& ScaleRMax, double ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, double ScaleCStep, const HString& Optimization, const HString& Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue) const

HDeformableModel HXLDCont::CreateLocalDeformableModelXld(Hlong NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, double AngleStep, double ScaleRMin, const HTuple& ScaleRMax, double ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, double ScaleCStep, const char* Optimization, const char* Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue) const

HDeformableModel HXLDCont::CreateLocalDeformableModelXld(Hlong NumLevels, const HTuple& AngleStart, const HTuple& AngleExtent, double AngleStep, double ScaleRMin, const HTuple& ScaleRMax, double ScaleRStep, double ScaleCMin, const HTuple& ScaleCMax, double ScaleCStep, const wchar_t* Optimization, const wchar_t* Metric, Hlong MinContrast, const HTuple& GenParamName, const HTuple& GenParamValue) const   (Windows only)

static void HOperatorSet.CreateLocalDeformableModelXld(HObject contours, HTuple numLevels, HTuple angleStart, HTuple angleExtent, HTuple angleStep, HTuple scaleRMin, HTuple scaleRMax, HTuple scaleRStep, HTuple scaleCMin, HTuple scaleCMax, HTuple scaleCStep, HTuple optimization, HTuple metric, HTuple minContrast, HTuple genParamName, HTuple genParamValue, out HTuple modelID)

void HDeformableModel.CreateLocalDeformableModelXld(HXLDCont contours, HTuple numLevels, HTuple angleStart, HTuple angleExtent, HTuple angleStep, double scaleRMin, HTuple scaleRMax, HTuple scaleRStep, double scaleCMin, HTuple scaleCMax, HTuple scaleCStep, HTuple optimization, string metric, int minContrast, HTuple genParamName, HTuple genParamValue)

void HDeformableModel.CreateLocalDeformableModelXld(HXLDCont contours, int numLevels, HTuple angleStart, HTuple angleExtent, double angleStep, double scaleRMin, HTuple scaleRMax, double scaleRStep, double scaleCMin, HTuple scaleCMax, double scaleCStep, string optimization, string metric, int minContrast, HTuple genParamName, HTuple genParamValue)

HDeformableModel HXLDCont.CreateLocalDeformableModelXld(HTuple numLevels, HTuple angleStart, HTuple angleExtent, HTuple angleStep, double scaleRMin, HTuple scaleRMax, HTuple scaleRStep, double scaleCMin, HTuple scaleCMax, HTuple scaleCStep, HTuple optimization, string metric, int minContrast, HTuple genParamName, HTuple genParamValue)

HDeformableModel HXLDCont.CreateLocalDeformableModelXld(int numLevels, HTuple angleStart, HTuple angleExtent, double angleStep, double scaleRMin, HTuple scaleRMax, double scaleRStep, double scaleCMin, HTuple scaleCMax, double scaleCStep, string optimization, string metric, int minContrast, HTuple genParamName, HTuple genParamValue)

Description

The operator create_local_deformable_model_xldcreate_local_deformable_model_xldCreateLocalDeformableModelXldCreateLocalDeformableModelXldCreateLocalDeformableModelXld creates a deformable model used for local deformable matching from the XLD contours passed in ContoursContoursContoursContourscontours. The XLD contours represent the gray-value edges of the object to be searched for. In contrast to the operator create_local_deformable_modelcreate_local_deformable_modelCreateLocalDeformableModelCreateLocalDeformableModelCreateLocalDeformableModel, which creates a deformable model from a template image, the operator create_local_deformable_model_xldcreate_local_deformable_model_xldCreateLocalDeformableModelXldCreateLocalDeformableModelXldCreateLocalDeformableModelXld creates the deformable model from XLD contours.

The center of gravity of the smallest surrounding rectangle of the ContoursContoursContoursContourscontours that is parallel to the coordinate axes is used as the origin (reference point) of the model. A different origin can be set with set_deformable_model_originset_deformable_model_originSetDeformableModelOriginSetDeformableModelOriginSetDeformableModelOrigin.

For further explanation on the deformable model and its parameters we refer to the description of create_planar_uncalib_deformable_modelcreate_planar_uncalib_deformable_modelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModel and create_local_deformable_modelcreate_local_deformable_modelCreateLocalDeformableModelCreateLocalDeformableModelCreateLocalDeformableModel. Note that set_local_deformable_model_metricset_local_deformable_model_metricSetLocalDeformableModelMetricSetLocalDeformableModelMetricSetLocalDeformableModelMetric can be used to change the metric of the model.

Attention

Note that, in contrast to the operator create_local_deformable_modelcreate_local_deformable_modelCreateLocalDeformableModelCreateLocalDeformableModelCreateLocalDeformableModel, it is not possible to specify a minimum size of the model components. To avoid small model components in the model, short contours can be eliminated with the operator select_contours_xldselect_contours_xldSelectContoursXldSelectContoursXldSelectContoursXld before calling create_local_deformable_model_xldcreate_local_deformable_model_xldCreateLocalDeformableModelXldCreateLocalDeformableModelXldCreateLocalDeformableModelXld.

Execution Information

This operator returns a handle. Note that the state of an instance of this handle type may be changed by specific operators even though the handle is used as an input parameter by those operators.

Parameters

ContoursContoursContoursContourscontours (input_object)  xld_cont(-array) objectHXLDContHXLDContHobject

Input contours that will be used to create the model.

NumLevelsNumLevelsNumLevelsNumLevelsnumLevels (input_control)  integer HTupleHTupleHtuple (integer / string) (int / long / string) (Hlong / HString) (Hlong / char*)

Maximum number of pyramid levels.

Default value: 'auto' "auto" "auto" "auto" "auto"

List of values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 'auto'"auto""auto""auto""auto"

AngleStartAngleStartAngleStartAngleStartangleStart (input_control)  angle.rad-array HTupleHTupleHtuple (real) (double) (double) (double)

This parameter is not used.

Default value: []

AngleExtentAngleExtentAngleExtentAngleExtentangleExtent (input_control)  angle.rad-array HTupleHTupleHtuple (real) (double) (double) (double)

This parameter is not used.

Default value: []

AngleStepAngleStepAngleStepAngleStepangleStep (input_control)  angle.rad HTupleHTupleHtuple (real / string) (double / string) (double / HString) (double / char*)

Step length of the angles (resolution).

Default value: 'auto' "auto" "auto" "auto" "auto"

Suggested values: 'auto'"auto""auto""auto""auto", 0.0175, 0.0349, 0.0524, 0.0698, 0.0873

Restriction: AngleStep > 0 && AngleStep <= pi / 16

ScaleRMinScaleRMinScaleRMinScaleRMinscaleRMin (input_control)  number HTupleHTupleHtuple (real) (double) (double) (double)

Minimum scale of the pattern in row direction.

Default value: 1.0

Suggested values: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0

Restriction: ScaleRMin > 0

ScaleRMaxScaleRMaxScaleRMaxScaleRMaxscaleRMax (input_control)  number-array HTupleHTupleHtuple (real) (double) (double) (double)

This parameter is not used.

Default value: []

ScaleRStepScaleRStepScaleRStepScaleRStepscaleRStep (input_control)  number HTupleHTupleHtuple (real / string) (double / string) (double / HString) (double / char*)

Scale step length (resolution) in row direction.

Default value: 'auto' "auto" "auto" "auto" "auto"

Suggested values: 'auto'"auto""auto""auto""auto", 0.01, 0.02, 0.05, 0.1, 0.15, 0.2

Restriction: ScaleRStep > 0

ScaleCMinScaleCMinScaleCMinScaleCMinscaleCMin (input_control)  number HTupleHTupleHtuple (real) (double) (double) (double)

Minimum scale of the pattern in column direction.

Default value: 1.0

Suggested values: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0

Restriction: ScaleCMin > 0

ScaleCMaxScaleCMaxScaleCMaxScaleCMaxscaleCMax (input_control)  number-array HTupleHTupleHtuple (real) (double) (double) (double)

This parameter is not used.

Default value: []

ScaleCStepScaleCStepScaleCStepScaleCStepscaleCStep (input_control)  number HTupleHTupleHtuple (real / string) (double / string) (double / HString) (double / char*)

Scale step length (resolution) in column direction.

Default value: 'auto' "auto" "auto" "auto" "auto"

Suggested values: 'auto'"auto""auto""auto""auto", 0.01, 0.02, 0.05, 0.1, 0.15, 0.2

Restriction: ScaleCStep > 0

OptimizationOptimizationOptimizationOptimizationoptimization (input_control)  string(-array) HTupleHTupleHtuple (string) (string) (HString) (char*)

Kind of optimization used for generating the model.

Default value: 'auto' "auto" "auto" "auto" "auto"

List of values: 'auto'"auto""auto""auto""auto", 'none'"none""none""none""none", 'point_reduction_high'"point_reduction_high""point_reduction_high""point_reduction_high""point_reduction_high", 'point_reduction_low'"point_reduction_low""point_reduction_low""point_reduction_low""point_reduction_low", 'point_reduction_medium'"point_reduction_medium""point_reduction_medium""point_reduction_medium""point_reduction_medium"

MetricMetricMetricMetricmetric (input_control)  string HTupleHTupleHtuple (string) (string) (HString) (char*)

Match metric.

Default value: 'ignore_local_polarity' "ignore_local_polarity" "ignore_local_polarity" "ignore_local_polarity" "ignore_local_polarity"

List of values: 'ignore_color_polarity'"ignore_color_polarity""ignore_color_polarity""ignore_color_polarity""ignore_color_polarity", 'ignore_global_polarity'"ignore_global_polarity""ignore_global_polarity""ignore_global_polarity""ignore_global_polarity", 'ignore_local_polarity'"ignore_local_polarity""ignore_local_polarity""ignore_local_polarity""ignore_local_polarity", 'ignore_part_polarity'"ignore_part_polarity""ignore_part_polarity""ignore_part_polarity""ignore_part_polarity", 'use_polarity'"use_polarity""use_polarity""use_polarity""use_polarity"

MinContrastMinContrastMinContrastMinContrastminContrast (input_control)  number HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Minimum contrast of the objects in the search images.

Default value: 5

Suggested values: 1, 2, 3, 5, 7, 10, 20, 30, 40

GenParamNameGenParamNameGenParamNameGenParamNamegenParamName (input_control)  string-array HTupleHTupleHtuple (string) (string) (HString) (char*)

The generic parameter names.

Default value: []

List of values: [], 'part_size'"part_size""part_size""part_size""part_size"

GenParamValueGenParamValueGenParamValueGenParamValuegenParamValue (input_control)  integer-array HTupleHTupleHtuple (integer / real / string) (int / long / double / string) (Hlong / double / HString) (Hlong / double / char*)

Values of the generic parameters.

Default value: []

List of values: [], 'big'"big""big""big""big", 'medium'"medium""medium""medium""medium", 'small'"small""small""small""small"

ModelIDModelIDModelIDModelIDmodelID (output_control)  deformable_model HDeformableModel, HTupleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)

Handle of the model.

Result

If the parameters are valid, the operator create_local_deformable_model_xldcreate_local_deformable_model_xldCreateLocalDeformableModelXldCreateLocalDeformableModelXldCreateLocalDeformableModelXld returns the value 2 (H_MSG_TRUE). If necessary, an exception is raised. If the parameter NumLevelsNumLevelsNumLevelsNumLevelsnumLevels is chosen such that the model contains too few points, the error 8510 is raised.

Possible Predecessors

read_contour_xld_dxfread_contour_xld_dxfReadContourXldDxfReadContourXldDxfReadContourXldDxf, edges_sub_pixedges_sub_pixEdgesSubPixEdgesSubPixEdgesSubPix, select_contours_xldselect_contours_xldSelectContoursXldSelectContoursXldSelectContoursXld

Possible Successors

find_local_deformable_modelfind_local_deformable_modelFindLocalDeformableModelFindLocalDeformableModelFindLocalDeformableModel

See also

create_local_deformable_modelcreate_local_deformable_modelCreateLocalDeformableModelCreateLocalDeformableModelCreateLocalDeformableModel

Module

Matching