Use the tabs on the upper right to switch to a different programming language.

Use the tabs on the upper right to switch to a different programming language.

Use the tabs on the upper right to switch to a different programming language.

dev_set_line_widthdev_set_line_widthDevSetLineWidthDevSetLineWidth (Operator)

Name

dev_set_line_widthdev_set_line_widthDevSetLineWidthDevSetLineWidth — Define the line width for region contour output.

Signature

dev_set_line_width( : : LineWidth : )

Herror dev_set_line_width(const Hlong LineWidth)

Herror T_dev_set_line_width(const Htuple LineWidth)

void DevSetLineWidth(const HTuple& LineWidth)

static void HWindow::DevSetLineWidth(Hlong LineWidth)

static void HOperatorSet.DevSetLineWidth(HTuple lineWidth)

static void HWindow.DevSetLineWidth(int lineWidth)

Description

dev_set_line_widthdev_set_line_widthDevSetLineWidthDevSetLineWidthDevSetLineWidth defines the line width (in pixel) that is used to display region contours (in 'margin'"margin""margin""margin""margin" mode), XLDs, and other geometric output (e.g., disp_regiondisp_regionDispRegionDispRegionDispRegion, disp_linedisp_lineDispLineDispLineDispLine, etc.).

For more information see the description of the operator set_line_widthset_line_widthSetLineWidthSetLineWidthSetLineWidth. However, in contrast to that operator the new line width is also used for all new graphics windows that are opened afterwards.

Attention

Using the code export feature of HDevelop, the code that is generated for this operator may have a different behavior than the related HALCON operator. For a detailed description of the code export of HDevelop graphics operators into the different programming languages see in the “HDevelop User's Guide” the chapter Code Export -> General Aspects of Code Generation -> Graphics Windows.

Parameters

LineWidthLineWidthLineWidthLineWidthlineWidth (input_control)  integer HTupleHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Line width for region output in contour mode.

Default value: 1

Restriction: LineWidth >= 1

Example (HDevelop)

read_image(Image,'monkey')
threshold(Image,Region,128,255)
dev_set_draw('margin')
dev_set_line_width(5)
dev_clear_window ()
dev_display(Region)

Result

If the values of the specified parameters are correct, dev_set_line_widthdev_set_line_widthDevSetLineWidthDevSetLineWidthDevSetLineWidth returns 2 (H_MSG_TRUE). Otherwise, an exception is raised and an error code returned.

Possible Successors

dev_displaydev_displayDevDisplayDevDisplayDevDisplay

See also

set_line_widthset_line_widthSetLineWidthSetLineWidthSetLineWidth, query_line_widthquery_line_widthQueryLineWidthQueryLineWidthQueryLineWidth

Module

Foundation