get_deformable_model_originT_get_deformable_model_originGetDeformableModelOriginGetDeformableModelOriginget_deformable_model_origin (Operator)
Name
get_deformable_model_originT_get_deformable_model_originGetDeformableModelOriginGetDeformableModelOriginget_deformable_model_origin — Return the origin (reference point) of a deformable model.
Signature
Herror T_get_deformable_model_origin(const Htuple ModelID, Htuple* Row, Htuple* Column)
def get_deformable_model_origin(model_id: HHandle) -> Tuple[float, float]
Description
The operator get_deformable_model_originget_deformable_model_originGetDeformableModelOriginGetDeformableModelOriginGetDeformableModelOriginget_deformable_model_origin returns the origin
(reference point) of the deformable model ModelIDModelIDModelIDModelIDmodelIDmodel_id.
The origin is specified relative to the center of gravity of the domain
(region) of the image that was used to create the deformable model with
create_planar_uncalib_deformable_modelcreate_planar_uncalib_deformable_modelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelcreate_planar_uncalib_deformable_model or
create_planar_calib_deformable_modelcreate_planar_calib_deformable_modelCreatePlanarCalibDeformableModelCreatePlanarCalibDeformableModelCreatePlanarCalibDeformableModelcreate_planar_calib_deformable_model. Hence, an origin of (0,0)
means that the center of gravity of the domain of the model image is used as
the origin. An origin of (-20,-40) means that the origin lies to the upper
left of the center of gravity.
Execution Information
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
Parameters
ModelIDModelIDModelIDModelIDmodelIDmodel_id (input_control) deformable_model → HDeformableModel, HTupleHHandleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)
Handle of the model.
RowRowRowRowrowrow (output_control) point.y → HTuplefloatHTupleHtuple (real) (double) (double) (double)
Row coordinate of the origin of the deformable model.
ColumnColumnColumnColumncolumncolumn (output_control) point.x → HTuplefloatHTupleHtuple (real) (double) (double) (double)
Column coordinate of the origin of the deformable model.
Result
If the handle of the model is valid, the operator
get_deformable_model_originget_deformable_model_originGetDeformableModelOriginGetDeformableModelOriginGetDeformableModelOriginget_deformable_model_origin returns the value TRUE. If necessary
an exception is raised.
Possible Predecessors
create_planar_uncalib_deformable_modelcreate_planar_uncalib_deformable_modelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelCreatePlanarUncalibDeformableModelcreate_planar_uncalib_deformable_model,
read_deformable_modelread_deformable_modelReadDeformableModelReadDeformableModelReadDeformableModelread_deformable_model,
set_deformable_model_originset_deformable_model_originSetDeformableModelOriginSetDeformableModelOriginSetDeformableModelOriginset_deformable_model_origin
Possible Successors
find_planar_uncalib_deformable_modelfind_planar_uncalib_deformable_modelFindPlanarUncalibDeformableModelFindPlanarUncalibDeformableModelFindPlanarUncalibDeformableModelfind_planar_uncalib_deformable_model
See also
area_centerarea_centerAreaCenterAreaCenterAreaCenterarea_center
Module
Matching