get_metrology_object_num_instances — Get the number of instances of the metrology objects of a metrology model.
get_metrology_object_num_instances allows to access the number of
instances (results) of measurements applied by
for the metrology objects. Note that by default, the maximum number of
instances of each metrology object is set to 1. Thus, by default,
the result of
get_metrology_object_num_instances will typically be
1 as well. To allow more instances, before applying the measurement
apply_metrology_model you have to explicitly set the parameter
'num_instances' to a higher value or to 'all' using
For an explanation of the concept of 2D metrology see the introduction of chapter 2D Metrology.
The metrology model is defined by the handle
Index specifies for which metrology object the instances
are queried. For
Index set to 'all', the number of
instances of all metrology objects are returned. The number of instances is
NumInstances for each metrology object that was passed
Handle of the metrology model.
→(integer / string)
Index of the metrology objects.
Default value: 0
Suggested values: 'all', 0, 1, 2
→(real / integer)
Number of Instances of the metrology objects.
If the parameters are valid, the operator
get_metrology_object_num_instances returns the value TRUE. If
necessary, an exception is raised.