set_descriptor_model_originT_set_descriptor_model_originSetDescriptorModelOriginSetDescriptorModelOriginset_descriptor_model_origin (Operator)
Name
set_descriptor_model_originT_set_descriptor_model_originSetDescriptorModelOriginSetDescriptorModelOriginset_descriptor_model_origin — Sets the origin of a descriptor model.
Signature
Herror T_set_descriptor_model_origin(const Htuple ModelID, const Htuple Row, const Htuple Column)
def set_descriptor_model_origin(model_id: HHandle, row: Union[float, int], column: Union[float, int]) -> None
Description
The operator set_descriptor_model_originset_descriptor_model_originSetDescriptorModelOriginSetDescriptorModelOriginSetDescriptorModelOriginset_descriptor_model_origin sets the origin (reference
point) of the descriptor model ModelIDModelIDModelIDModelIDmodelIDmodel_id to a new
value. The origin is specified relative to the center of gravity of the
domain (region) of the image that was used to create the descriptor model
with create_uncalib_descriptor_modelcreate_uncalib_descriptor_modelCreateUncalibDescriptorModelCreateUncalibDescriptorModelCreateUncalibDescriptorModelcreate_uncalib_descriptor_model, or
create_calib_descriptor_modelcreate_calib_descriptor_modelCreateCalibDescriptorModelCreateCalibDescriptorModelCreateCalibDescriptorModelcreate_calib_descriptor_model. Hence, an origin of (0,0) means
that the center of gravity of the domain of the model image is used as
the origin. An origin of (-20,-40) means that the origin lies to the
upper left of the center of gravity. The new setting affects the
succeeding find_uncalib_descriptor_modelfind_uncalib_descriptor_modelFindUncalibDescriptorModelFindUncalibDescriptorModelFindUncalibDescriptorModelfind_uncalib_descriptor_model and
find_calib_descriptor_modelfind_calib_descriptor_modelFindCalibDescriptorModelFindCalibDescriptorModelFindCalibDescriptorModelfind_calib_descriptor_model calls.
Execution Information
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
This operator modifies the state of the following input parameter:
During execution of this operator, access to the value of this parameter must be synchronized if it is used across multiple threads.
Parameters
ModelIDModelIDModelIDModelIDmodelIDmodel_id (input_control, state is modified) descriptor_model → HDescriptorModel, HTupleHHandleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)
Handle of a descriptor model.
RowRowRowRowrowrow (input_control) real → HTupleUnion[float, int]HTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)
Translation of origin in row direction.
Default value: 0
ColumnColumnColumnColumncolumncolumn (input_control) real → HTupleUnion[float, int]HTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)
Translation of origin in column direction.
Default value: 0
Possible Predecessors
create_uncalib_descriptor_modelcreate_uncalib_descriptor_modelCreateUncalibDescriptorModelCreateUncalibDescriptorModelCreateUncalibDescriptorModelcreate_uncalib_descriptor_model,
create_calib_descriptor_modelcreate_calib_descriptor_modelCreateCalibDescriptorModelCreateCalibDescriptorModelCreateCalibDescriptorModelcreate_calib_descriptor_model,
read_descriptor_modelread_descriptor_modelReadDescriptorModelReadDescriptorModelReadDescriptorModelread_descriptor_model
See also
get_descriptor_model_originget_descriptor_model_originGetDescriptorModelOriginGetDescriptorModelOriginGetDescriptorModelOriginget_descriptor_model_origin,
create_uncalib_descriptor_modelcreate_uncalib_descriptor_modelCreateUncalibDescriptorModelCreateUncalibDescriptorModelCreateUncalibDescriptorModelcreate_uncalib_descriptor_model
Module
Matching