set_ncc_model_originT_set_ncc_model_originSetNccModelOriginSetNccModelOriginset_ncc_model_origin (Operator)


set_ncc_model_originT_set_ncc_model_originSetNccModelOriginSetNccModelOriginset_ncc_model_origin — Set the origin (reference point) of an NCC model.


set_ncc_model_origin( : : ModelID, Row, Column : )

Herror T_set_ncc_model_origin(const Htuple ModelID, const Htuple Row, const Htuple Column)

void SetNccModelOrigin(const HTuple& ModelID, const HTuple& Row, const HTuple& Column)

void HNCCModel::SetNccModelOrigin(double Row, double Column) const

static void HOperatorSet.SetNccModelOrigin(HTuple modelID, HTuple row, HTuple column)

void HNCCModel.SetNccModelOrigin(double row, double column)

def set_ncc_model_origin(model_id: HHandle, row: float, column: float) -> None


The operator set_ncc_model_originset_ncc_model_originSetNccModelOriginSetNccModelOriginSetNccModelOriginset_ncc_model_origin sets the origin (reference point) of the NCC model ModelIDModelIDModelIDModelIDmodelIDmodel_id to a new value. The origin is specified relative to the center of gravity of the domain (region) of the image that was used to create the NCC model with create_ncc_modelcreate_ncc_modelCreateNccModelCreateNccModelCreateNccModelcreate_ncc_model. Hence, an origin of (0,0) means that the center of gravity of the domain of the model image is used as the origin. An origin of (-20,-40) means that the origin lies to the upper left of the center of gravity.

Execution Information

This operator modifies the state of the following input parameter:

During execution of this operator, access to the value of this parameter must be synchronized if it is used across multiple threads.


ModelIDModelIDModelIDModelIDmodelIDmodel_id (input_control, state is modified)  ncc_model HNCCModel, HTupleHHandleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)

Handle of the model.

RowRowRowRowrowrow (input_control)  point.y HTuplefloatHTupleHtuple (real) (double) (double) (double)

Row coordinate of the origin of the NCC model.

ColumnColumnColumnColumncolumncolumn (input_control)  point.x HTuplefloatHTupleHtuple (real) (double) (double) (double)

Column coordinate of the origin of the NCC model.


If the handle of the model is valid, the operator set_ncc_model_originset_ncc_model_originSetNccModelOriginSetNccModelOriginSetNccModelOriginset_ncc_model_origin returns the value TRUE. If necessary an exception is raised.

Possible Predecessors

create_ncc_modelcreate_ncc_modelCreateNccModelCreateNccModelCreateNccModelcreate_ncc_model, read_ncc_modelread_ncc_modelReadNccModelReadNccModelReadNccModelread_ncc_model

Possible Successors

find_ncc_modelfind_ncc_modelFindNccModelFindNccModelFindNccModelfind_ncc_model, get_ncc_model_originget_ncc_model_originGetNccModelOriginGetNccModelOriginGetNccModelOriginget_ncc_model_origin, find_ncc_modelsfind_ncc_modelsFindNccModelsFindNccModelsFindNccModelsfind_ncc_models

See also