clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models (Operator)
Name
clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models — This operator is inoperable. It had the following function:
Delete all metrology models and free the allocated memory.
Warning
clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models is obsolete, inoperable, and is only
provided for reasons of backward compatibility.
New applications should not use clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models, the
operator will be removed in future versions.
Signature
clear_all_metrology_models( : : : )
Herror clear_all_metrology_models()
Herror T_clear_all_metrology_models()
void ClearAllMetrologyModels()
def clear_all_metrology_models() -> None
Description
.
Attention
clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models exists solely for the purpose
of implementing the “reset program” functionality in HDevelop.
clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models must not be used in any
application.
Execution Information
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
Result
The operator clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModelsclear_all_metrology_models returns the value
TRUE if all metrology models were freed correctly.
Otherwise, an exception will be raised.
Module
2D Metrology