clear_bead_inspection_modelT_clear_bead_inspection_modelClearBeadInspectionModelClearBeadInspectionModelclear_bead_inspection_model (Operator)

Name

clear_bead_inspection_modelT_clear_bead_inspection_modelClearBeadInspectionModelClearBeadInspectionModelclear_bead_inspection_model — Delete the bead inspection model and free the allocated memory.

Signature

clear_bead_inspection_model( : : BeadInspectionModel : )

Herror T_clear_bead_inspection_model(const Htuple BeadInspectionModel)

void ClearBeadInspectionModel(const HTuple& BeadInspectionModel)

void HBeadInspectionModel::ClearBeadInspectionModel() const

static void HOperatorSet.ClearBeadInspectionModel(HTuple beadInspectionModel)

void HBeadInspectionModel.ClearBeadInspectionModel()

def clear_bead_inspection_model(bead_inspection_model: HHandle) -> None

Description

The operator clear_bead_inspection_modelclear_bead_inspection_modelClearBeadInspectionModelClearBeadInspectionModelClearBeadInspectionModelclear_bead_inspection_model deletes a bead inspection model that was created by create_bead_inspection_modelcreate_bead_inspection_modelCreateBeadInspectionModelCreateBeadInspectionModelCreateBeadInspectionModelcreate_bead_inspection_model. All memory used by the model is freed. The handle of the model is passed in BeadInspectionModelBeadInspectionModelBeadInspectionModelBeadInspectionModelbeadInspectionModelbead_inspection_model. It is invalid after the operator call.

Execution Information

This operator modifies the state of the following input parameter:

During execution of this operator, access to the value of this parameter must be synchronized if it is used across multiple threads.

Parameters

BeadInspectionModelBeadInspectionModelBeadInspectionModelBeadInspectionModelbeadInspectionModelbead_inspection_model (input_control, state is modified)  bead_inspection_model HBeadInspectionModel, HTupleHHandleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)

Handle of the bead inspection model.

Result

The operator clear_bead_inspection_modelclear_bead_inspection_modelClearBeadInspectionModelClearBeadInspectionModelClearBeadInspectionModelclear_bead_inspection_model returns the value TRUE if a valid handle is passed and the referred bead inspection model can be freed correctly. Otherwise, an exception will be raised.

Possible Predecessors

create_bead_inspection_modelcreate_bead_inspection_modelCreateBeadInspectionModelCreateBeadInspectionModelCreateBeadInspectionModelcreate_bead_inspection_model

See also

create_bead_inspection_modelcreate_bead_inspection_modelCreateBeadInspectionModelCreateBeadInspectionModelCreateBeadInspectionModelcreate_bead_inspection_model

Module

2D Metrology