read_bar_code_modelT_read_bar_code_modelReadBarCodeModelReadBarCodeModelread_bar_code_model (Operator)
Name
read_bar_code_modelT_read_bar_code_modelReadBarCodeModelReadBarCodeModelread_bar_code_model — Read a bar code model from a file and create a new model.
Signature
def read_bar_code_model(file_name: str) -> HHandle
Description
The operator read_bar_code_modelread_bar_code_modelReadBarCodeModelReadBarCodeModelReadBarCodeModelread_bar_code_model reads the bar code model from the
file FileNameFileNameFileNameFileNamefileNamefile_name and creates a new model that is an identical copy of
the saved model. The parameter BarCodeHandleBarCodeHandleBarCodeHandleBarCodeHandlebarCodeHandlebar_code_handle returns the handle
of the new model. The model file FileNameFileNameFileNameFileNamefileNamefile_name must have been created
by the operator write_bar_code_modelwrite_bar_code_modelWriteBarCodeModelWriteBarCodeModelWriteBarCodeModelwrite_bar_code_model.
The default HALCON file extension for bar code model is 'bcm'.
Execution Information
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
This operator returns a handle. Note that the state of an instance of this handle type may be changed by specific operators even though the handle is used as an input parameter by those operators.
Parameters
FileNameFileNameFileNameFileNamefileNamefile_name (input_control) filename.read → HTuplestrHTupleHtuple (string) (string) (HString) (char*)
Name of the bar code model file.
Default value:
'bar_code_model.bcm'
"bar_code_model.bcm"
"bar_code_model.bcm"
"bar_code_model.bcm"
"bar_code_model.bcm"
"bar_code_model.bcm"
File extension: .bcm
BarCodeHandleBarCodeHandleBarCodeHandleBarCodeHandlebarCodeHandlebar_code_handle (output_control) barcode → HBarCode, HTupleHHandleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)
Handle of the bar code model.
Result
The operator read_bar_code_modelread_bar_code_modelReadBarCodeModelReadBarCodeModelReadBarCodeModelread_bar_code_model returns the value TRUE
if the named bar code file was found and correctly read.
Otherwise, an exception is raised.
Possible Successors
find_bar_codefind_bar_codeFindBarCodeFindBarCodeFindBarCodefind_bar_code
Alternatives
create_bar_code_modelcreate_bar_code_modelCreateBarCodeModelCreateBarCodeModelCreateBarCodeModelcreate_bar_code_model
See also
write_bar_code_modelwrite_bar_code_modelWriteBarCodeModelWriteBarCodeModelWriteBarCodeModelwrite_bar_code_model,
clear_bar_code_modelclear_bar_code_modelClearBarCodeModelClearBarCodeModelClearBarCodeModelclear_bar_code_model
Module
Bar Code