filter_kalman
— Estimate the current state of a system with the help of the
Kalman filtering.
filter_kalman
is obsolete and is only provided for
reasons of backward compatibility.
filter_kalman( : : Dimension, Model, Measurement, PredictionIn : PredictionOut, Estimate)
The operator filter_kalman
returns an estimate of the
current state (or also a prediction of a future state) of a discrete,
stochastically disturbed, linear system. In practice, Kalman filters are
used successfully in image processing in the analysis of
image sequences (background identification, lane tracking with the
help of line tracing or region analysis, etc.). A short introduction
concerning the theory of the Kalman filters will be followed by
a detailed description of the routine filter_kalman
itself.
KALMAN FILTER: A discrete, stochastically disturbed, linear system is characterized by the following markers:
State x(t): Describes the current state of the system (speeds, temperatures,...).
Parameter u(t): Inputs from outside into the system.
Measurement y(t): Measurements gained by observing the system. They indicate the state of the system (or at least parts of it).
An output function describing the dependence of the measurements on the state.
A transition function indicating how the state changes with regard to time, the current value and the parameters.
The output function and the transition function are linear. Their application can therefore be written as a multiplication with a matrix.
The transition function is described with the help of the transition matrix A(t) and the parameter matrix G(t), the initial function is described by the measurement matrix C(t). Hereby C(t) characterizes the dependency of the new state on the old, G(t) indicates the dependency on the parameters. In practice it is rarely possible (or at least too time consuming) to describe a real system and its behavior in a complete and exact way. Normally only a relatively small number of variables will be used to simulate the behavior of the system. This leads to an error, the so called system error (also called system disturbance) v(t).
The output function, too, is usually not exact. Each measurement is faulty. The measurement errors will be called w(t). Therefore the following system equations arise: x(t+1) = A(t)x(t) + G(t)u(t) + v(t) y(t) = c(t)x(t) + w(t) The system error v(t) and the measurement error w(t) are not known. As far as systems are concerned which are interpreted with the help of the Kalman filter, these two errors are considered as Gaussian distributed random vectors (therefore the expression “stochastically disturbed systems”). Therefore the system can be calculated, if the corresponding expected values for v(t) and w(t) as well as the covariance matrices are known.
The estimation of the state of the system is carried out in the same way as in the Gaussian-Markov-estimation. However, the Kalman filter is a recursive algorithm which is based only on the current measurements y(t) and the latest state x(t). The latter implicitly also includes the knowledge about earlier measurements.
A suitable estimate value x0, which is interpreted as the expected value of a random variable for x(0), must be indicated for the initial value x(0). This variable should have an expected error value of 0 and the covariance matrix P0 which also has to be indicated. At a certain time t the expected values of both disturbances v(t) and w(t) should be 0 and their covariances should be Q(t) and R(t). x(t), v(t) and w(t) will usually be assumed to be not correlated (any kind of noise-process can be modelled - however the development of the necessary matrices by the user will be considerably more demanding). The following conditions must be met by the searched estimate values :
The estimate values are linearly dependent on the actual value x(t) and on the measurement sequence y(0), y(1), ... , y(t).
{ being hereby considered to meet its expectations, i.e. .}
The grade criterion for is the criterion of minimal variance, i.e. the variance of the estimation error defined as , being as small as possible.
After the initialization at each point in time t the Kalman filter executes the following calculation steps: Hereby is the covariance matrix of the estimation error, is the extrapolation value respective the prediction value of the state, are the covariances of the prediction error is the amplifier matrix (the so called Kalman gain), and X' is the transposed of a matrix X.
Please note that the prediction of the future state is also possible with the equation (K-I). Sometimes this is very useful in image processing in order to determine “regions of interest” in the next image.
As mentioned above, it is much more demanding to model any kind of noise processes. If for example the system noise and the measurement noise are correlated with the corresponding covariance matrix L, the equations for the Kalman gain and the error covariance matrix have to be modified: This means that the user himself has to establish the linear system equations from (K-I) up to (K-V) with respect to the actual problem. The user must therefore develop a mathematical model upon which the solution to the problem can be based. Statistical characteristics describing the inaccuracies of the system as well as the measurement errors, which are to be expected, thereby have to be estimated if they cannot be calculated exactly. Therefore the following individual steps are necessary:
Developing a mathematical model
Selecting characteristic state variables
Establishing the equations describing the changes of these state variables and their linearization (matrices A and G)
Establishing the equations describing the dependency of the measurement values of the system on the state variables and their linearization (matrix C)
Developing or estimating of statistical dependencies between the system disturbances (matrix Q)
Developing or estimating of statistical dependencies between the measurement errors (matrix R)
Initialization of the initial state
As mentioned above, the initialization of the system (point 7) hereby necessitates to indicate an estimate of the state of the system at the time 0 and the corresponding covariance matrix . If the exact initial state is not known, it is recommendable to set the components of the vector to the average values of the corresponding range, and to set high values for (about the size of the squares of the range). After a few iterations (when the number of the accumulated measurement values in total has exceeded the number of the system values), the values which have been determined in this way are also usable.
If on the other hand the initial state is known exactly, all entries for have to be set to 0, because describes the covariances of the error between the estimated value and the actual value x(0).
THE FILTER ROUTINE:
A Kalman filter is dependent on a range of data which can be organized in four groups:
transition matrix A, control matrix G including the parameter u and the measurement matrix C
system-error covariance matrix Q, system-error - measurement-error covariance matrix L, and measurement-error covariance matrix R
y
extrapolation vector and extrapolation-error covariance matrix
Thereby many systems can work without input “from outside”, i.e. without G and u. Further, system errors and measurement errors are normally not correlated (L is dropped).
Actually the data necessary for the routine will be set by the following parameters:
Dimension
:
This parameter includes the dimensions of the status vector, the
measurement vector and the controller vector. Dimension
thereby is a vector [n,m,p], whereby
'n' indicates the number of the state variables,
'm' the number of the measurement values and
'p' the number of the controller members.
For a system without determining control (i.e. without influence
“from outside”) therefore [n,m,0] has to be passed.
Model
:
This parameter includes the lined up matrices (vectors)
'A,C,Q,G,u' and (if necessary) 'L'
having been stored in row-major order. Model
therefore is a vector
of the length n*n + n*m + n*n + n*p + p [+ n*m].
The last summand is dropped, in case the system errors and measurement
errors are not correlated, i.e. there is no value for 'L' .
Measurement
:
This parameter includes the matrix 'R' which has been
stored in row-major order, and the measurement vector 'y' lined up.
Measurement
therefore is a vector of the dimension
m*m + m.
PredictionIn
/ PredictionOut
:
These two parameters include the matrix (the
extrapolation-error covariance matrix) which has been stored in
row-major order and the extrapolation vector lined up.
This means, they are vectors of the
length n*n + n. PredictionIn
therefore is an
input parameter, which must contain and
at the current time t. With
PredictionOut
the routine returns the
corresponding predictions and
.
Estimate
:
With this parameter the routine returns the matrix
(the estimation-error covariance matrix) which has been stored
in row-major order and the estimated state lined up.
Estimate
therefore is a
vector of the length n*n + n.
Please note that the covariance matrices must of course be symmetric.
Dimension
(input_control) integer-array →
(integer)
The dimensions of the state vector, the measurement and the controller vector.
Default value: [3,1,0]
Typical range of values: 0
≤
Dimension
≤
30
Model
(input_control) real-array →
(real)
The lined up matrices A,C,Q, possibly G and u, and if necessary L which have been stored in row-major order.
Default value: [1.0,1.0,0.5,0.0,1.0,1.0,0.0,0.0,1.0,1.0,0.0,0.0,54.3,37.9,48.0,37.9,34.3,42.5,48.0,42.5,43.7]
Typical range of values: 0.0
≤
Model
≤
10000.0
Measurement
(input_control) real-array →
(real)
The matrix R stored in row-major order and the measurement vector y lined up.
Default value: [1.2,1.0]
Typical range of values: 0.0
≤
Measurement
≤
10000.0
PredictionIn
(input_control) real-array →
(real)
The matrix (the extrapolation-error covariances) stored in row-major order and the extrapolation vector lined up.
Default value: [0.0,0.0,0.0,0.0,180.5,0.0,0.0,0.0,100.0,0.0,100.0,0.0]
Typical range of values: 0.0
≤
PredictionIn
≤
10000.0
PredictionOut
(output_control) real-array →
(real)
The matrix P* (the extrapolation-error covariances)stored in row-major order and the extrapolation vector lined up.
Estimate
(output_control) real-array →
(real)
The matrix (the estimation-error covariances) stored in row-major order and the estimated state lined up.
* Typical procedure: * To initialize the variables, which describe the model, e.g., with read_kalman('kalman.init',Dim,Mod,Meas,Pred) * Generation of the first measurements (typical of the first image of an * image series) with an appropriate problem-specific procedure (there is a * fictitious procedure extract_features in example): * extract_features(Image1,Meas,Meas1) * first Kalman-Filtering: filter_kalman(Dim,Mod,Meas1,Pred,Pred1,Est1) * To use the estimate value (if need be the prediction too) * with a problem-specific procedure (here use_est): * use_est(Est1) * To get the next measurements (e.g., from the next image): * extract_next_features(Image2,Meas1,Meas2) * if need be Update of the model parameter (a constant model) * second Kalman-Filtering: filter_kalman(Dim,Mod,Meas2,Pred1,Pred2,Est2) * use_est(Est2) * extract_next_features(Image3,Meas2,Meas3) * etc.
If the parameter values are correct, the operator
filter_kalman
returns the value 2 (H_MSG_TRUE).
Otherwise an exception is raised.
W.Hartinger: “Entwurf eines anwendungsunabhängigen Kalman-Filters mit
Untersuchungen im Bereich der Bildfolgenanalyse”; Diplomarbeit;
Technische Universität München, Institut für Informatik, Lehrstuhl
Prof. Radig; 1991.
R.E.Kalman: “A New Approach to Linear Filtering and Prediction Problems”;
Transactions ASME, Ser.D: Journal of Basic Engineering; Vol. 82, S.34-45;
1960.
R.E.Kalman, P.l.Falb, M.A.Arbib: “Topics in Mathematical System Theory”;
McGraw-Hill Book Company, New York; 1969.
K-P. Karmann, A.von Brandt: “Moving Object Recognition Using an Adaptive
Background Memory”; Time-Varying Image Processing and Moving Object
Recognition 2 (ed.: V. Cappellini), Proc. of the 3rd Interantional
Workshop, Florence, Italy, May, 29th - 31st, 1989; Elsevier, Amsterdam;
1990.
Foundation