hough_circle_transhough_circle_transHoughCircleTransHoughCircleTranshough_circle_trans (Operator)

Name

hough_circle_transhough_circle_transHoughCircleTransHoughCircleTranshough_circle_trans — Return the Hough-Transform for circles with a given radius.

Signature

hough_circle_trans(Region : HoughImage : Radius : )

Herror hough_circle_trans(const Hobject Region, Hobject* HoughImage, const Hlong Radius)

Herror T_hough_circle_trans(const Hobject Region, Hobject* HoughImage, const Htuple Radius)

void HoughCircleTrans(const HObject& Region, HObject* HoughImage, const HTuple& Radius)

HImage HRegion::HoughCircleTrans(const HTuple& Radius) const

HImage HRegion::HoughCircleTrans(Hlong Radius) const

static void HOperatorSet.HoughCircleTrans(HObject region, out HObject houghImage, HTuple radius)

HImage HRegion.HoughCircleTrans(HTuple radius)

HImage HRegion.HoughCircleTrans(int radius)

def hough_circle_trans(region: HObject, radius: MaybeSequence[int]) -> HObject

Description

The operator hough_circle_transhough_circle_transHoughCircleTransHoughCircleTransHoughCircleTranshough_circle_trans calculates the Hough transform for circles with a certain RadiusRadiusRadiusRadiusradiusradius in the regions passed by RegionRegionRegionRegionregionregion. Hereby the centers of all possible circles in the parameter space (the Hough or accumulator space respectively) will be accumulated for each point in the image space. Circle hypotheses supported by many points in the input region thereby generate a maximum in the area showing the circle's center in the output image (HoughImageHoughImageHoughImageHoughImagehoughImagehough_image). The circles' centers in the image space can be deduced from the coordinates of these maximums by subtracting the RadiusRadiusRadiusRadiusradiusradius. If more than one radius is transmitted, all Hough images will be shifted according to the maximal radius.

Execution Information

Parameters

RegionRegionRegionRegionregionregion (input_object)  region objectHRegionHObjectHRegionHobject

Binary edge image in which the circles are to be detected.

HoughImageHoughImageHoughImageHoughImagehoughImagehough_image (output_object)  image(-array) objectHImageHObjectHImageHobject * (int2)

Hough transform for circles with a given radius.

Number of elements: HoughImage == Radius

RadiusRadiusRadiusRadiusradiusradius (input_control)  integer(-array) HTupleMaybeSequence[int]HTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Radius of the circle to be searched in the image.

Number of elements: 1 <= Radius <= 500

Default value: 12

Typical range of values: 3 ≤ Radius Radius Radius Radius radius radius (lin)

Minimum increment: 1

Recommended increment: 1

Result

The operator hough_circle_transhough_circle_transHoughCircleTransHoughCircleTransHoughCircleTranshough_circle_trans returns the value 2 (H_MSG_TRUE) if the input is not empty. The behavior in case of empty input (no input regions available) is set via the operator set_system('no_object_result',<Result>)set_system("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>)set_system("no_object_result",<Result>), the behavior in case of empty region is set via set_system('empty_region_result',<Result>)set_system("empty_region_result",<Result>)SetSystem("empty_region_result",<Result>)SetSystem("empty_region_result",<Result>)SetSystem("empty_region_result",<Result>)set_system("empty_region_result",<Result>). If necessary an exception is raised.

Module

Foundation