polar_trans_image_extpolar_trans_image_extPolarTransImageExtPolarTransImageExtpolar_trans_image_ext (Operator)

Name

polar_trans_image_extpolar_trans_image_extPolarTransImageExtPolarTransImageExtpolar_trans_image_ext — Transform an annular arc in an image to polar coordinates.

Signature

polar_trans_image_ext(Image : PolarTransImage : Row, Column, AngleStart, AngleEnd, RadiusStart, RadiusEnd, Width, Height, Interpolation : )

Herror polar_trans_image_ext(const Hobject Image, Hobject* PolarTransImage, double Row, double Column, double AngleStart, double AngleEnd, double RadiusStart, double RadiusEnd, const Hlong Width, const Hlong Height, const char* Interpolation)

Herror T_polar_trans_image_ext(const Hobject Image, Hobject* PolarTransImage, const Htuple Row, const Htuple Column, const Htuple AngleStart, const Htuple AngleEnd, const Htuple RadiusStart, const Htuple RadiusEnd, const Htuple Width, const Htuple Height, const Htuple Interpolation)

void PolarTransImageExt(const HObject& Image, HObject* PolarTransImage, const HTuple& Row, const HTuple& Column, const HTuple& AngleStart, const HTuple& AngleEnd, const HTuple& RadiusStart, const HTuple& RadiusEnd, const HTuple& Width, const HTuple& Height, const HTuple& Interpolation)

HImage HImage::PolarTransImageExt(const HTuple& Row, const HTuple& Column, double AngleStart, double AngleEnd, const HTuple& RadiusStart, const HTuple& RadiusEnd, Hlong Width, Hlong Height, const HString& Interpolation) const

HImage HImage::PolarTransImageExt(double Row, double Column, double AngleStart, double AngleEnd, double RadiusStart, double RadiusEnd, Hlong Width, Hlong Height, const HString& Interpolation) const

HImage HImage::PolarTransImageExt(double Row, double Column, double AngleStart, double AngleEnd, double RadiusStart, double RadiusEnd, Hlong Width, Hlong Height, const char* Interpolation) const

HImage HImage::PolarTransImageExt(double Row, double Column, double AngleStart, double AngleEnd, double RadiusStart, double RadiusEnd, Hlong Width, Hlong Height, const wchar_t* Interpolation) const   ( Windows only)

static void HOperatorSet.PolarTransImageExt(HObject image, out HObject polarTransImage, HTuple row, HTuple column, HTuple angleStart, HTuple angleEnd, HTuple radiusStart, HTuple radiusEnd, HTuple width, HTuple height, HTuple interpolation)

HImage HImage.PolarTransImageExt(HTuple row, HTuple column, double angleStart, double angleEnd, HTuple radiusStart, HTuple radiusEnd, int width, int height, string interpolation)

HImage HImage.PolarTransImageExt(double row, double column, double angleStart, double angleEnd, double radiusStart, double radiusEnd, int width, int height, string interpolation)

def polar_trans_image_ext(image: HObject, row: Union[int, float], column: Union[int, float], angle_start: float, angle_end: float, radius_start: Union[int, float], radius_end: Union[int, float], width: int, height: int, interpolation: str) -> HObject

Description

polar_trans_image_extpolar_trans_image_extPolarTransImageExtPolarTransImageExtPolarTransImageExtpolar_trans_image_ext transforms the annular arc specified by the center point (RowRowRowRowrowrow, ColumnColumnColumnColumncolumncolumn), the radii RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start and RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end and the angles AngleStartAngleStartAngleStartAngleStartangleStartangle_start and AngleEndAngleEndAngleEndAngleEndangleEndangle_end in the image ImageImageImageImageimageimage to its polar coordinate version in the image PolarTransImagePolarTransImagePolarTransImagePolarTransImagepolarTransImagepolar_trans_image of the dimensions WidthWidthWidthWidthwidthwidth x HeightHeightHeightHeightheightheight.

The upper left pixel in the output image always corresponds to the point in the input image that is specified by RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start and AngleStartAngleStartAngleStartAngleStartangleStartangle_start. Analogously, the lower right pixel in the output image always corresponds to the point in the input image that is specified by RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end and AngleEndAngleEndAngleEndAngleEndangleEndangle_end. In the usual mode (AngleStartAngleStartAngleStartAngleStartangleStartangle_start < AngleEndAngleEndAngleEndAngleEndangleEndangle_end and RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start < RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end), the polar transformation is performed in the mathematically positive orientation (counterclockwise). Furthermore, points with smaller radii lie in the upper part of the output image. By suitably exchanging the values of these parameters (e.g., AngleStartAngleStartAngleStartAngleStartangleStartangle_start > AngleEndAngleEndAngleEndAngleEndangleEndangle_end or RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start > RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end), any desired orientation of the output image can be achieved.

The parameter InterpolationInterpolationInterpolationInterpolationinterpolationinterpolation is used to select the interpolation method 'bilinear'"bilinear""bilinear""bilinear""bilinear""bilinear" or 'nearest_neighbor'"nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor". With 'nearest_neighbor'"nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor", the gray value of a pixel in the output image is determined by the gray value of the closest pixel in the input image. With 'bilinear'"bilinear""bilinear""bilinear""bilinear""bilinear", the gray value of a pixel in the output image is determined by bilinear interpolation of the gray values of the four closest pixels in the input image. The mode 'bilinear'"bilinear""bilinear""bilinear""bilinear""bilinear" results in images of better quality, but is slower than the mode 'nearest_neighbor'"nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor".

The angles can be chosen from all real numbers. Center point and radii can be real as well. However, if they are both integers and the difference of RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end and RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start equals the height HeightHeightHeightHeightheightheight of the destination image, calculation will be sped up through an optimized routine.

The radii and angles are inclusive, which means that the first row of the target image contains the circle with radius RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start and the last row contains the circle with radius RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end. For complete circles, where the difference between AngleStartAngleStartAngleStartAngleStartangleStartangle_start and AngleEndAngleEndAngleEndAngleEndangleEndangle_end equals (360 degrees), this also means that the first column of the target image will be the same as the last.

To avoid this, do not make this difference , but degrees instead.

The call polar_trans_image(Image, PolarTransImage, Row, Column, Width, Height)polar_trans_image(Image, PolarTransImage, Row, Column, Width, Height)PolarTransImage(Image, PolarTransImage, Row, Column, Width, Height)PolarTransImage(Image, PolarTransImage, Row, Column, Width, Height)PolarTransImage(Image, PolarTransImage, Row, Column, Width, Height)polar_trans_image(Image, PolarTransImage, Row, Column, Width, Height) produces the same result as the call polar_trans_image_ext(Image, PolarTransImage, Row-0.5, Column-0.5, 6.2831853, 6.2831853/Width, 0, Height-1, Width, Height, 'nearest_neighbor')polar_trans_image_ext(Image, PolarTransImage, Row-0.5, Column-0.5, 6.2831853, 6.2831853/Width, 0, Height-1, Width, Height, "nearest_neighbor")PolarTransImageExt(Image, PolarTransImage, Row-0.5, Column-0.5, 6.2831853, 6.2831853/Width, 0, Height-1, Width, Height, "nearest_neighbor")PolarTransImageExt(Image, PolarTransImage, Row-0.5, Column-0.5, 6.2831853, 6.2831853/Width, 0, Height-1, Width, Height, "nearest_neighbor")PolarTransImageExt(Image, PolarTransImage, Row-0.5, Column-0.5, 6.2831853, 6.2831853/Width, 0, Height-1, Width, Height, "nearest_neighbor")polar_trans_image_ext(Image, PolarTransImage, Row-0.5, Column-0.5, 6.2831853, 6.2831853/Width, 0, Height-1, Width, Height, "nearest_neighbor").

The offset of 0.5 is necessary since polar_trans_imagepolar_trans_imagePolarTransImagePolarTransImagePolarTransImagepolar_trans_image does not do exact nearest neighbor interpolation and the radii and angles can be calculated using the information in the above paragraph and knowing that polar_trans_imagepolar_trans_imagePolarTransImagePolarTransImagePolarTransImagepolar_trans_image does not handle its arguments inclusively. The start angle is bigger than the end angle to make polar_trans_image_extpolar_trans_image_extPolarTransImageExtPolarTransImageExtPolarTransImageExtpolar_trans_image_ext go clockwise, just like polar_trans_imagepolar_trans_imagePolarTransImagePolarTransImagePolarTransImagepolar_trans_image does.

polar_trans_image_extpolar_trans_image_extPolarTransImageExtPolarTransImageExtPolarTransImageExtpolar_trans_image_ext can be executed on an OpenCL device if the input image does not exceed the maximum size of image objects of the selected device. Due to numerical reasons, there can be slight differences in the output compared to the execution on the CPU.

Additionally, for images of type 'byte'"byte""byte""byte""byte""byte", 'int2'"int2""int2""int2""int2""int2" or 'uint2'"uint2""uint2""uint2""uint2""uint2" the system parameter 'int_zooming'"int_zooming""int_zooming""int_zooming""int_zooming""int_zooming" selects between fast calculation in fixed point arithmetics ('int_zooming'"int_zooming""int_zooming""int_zooming""int_zooming""int_zooming" = 'true'"true""true""true""true""true") and highly accurate calculation in floating point arithmetics ('int_zooming'"int_zooming""int_zooming""int_zooming""int_zooming""int_zooming" = 'false'"false""false""false""false""false"). Fixed point calculation can lead to minor gray value deviations and pixels with undefined gray values.

Further Information

For an explanation of the different 2D coordinate systems used in HALCON, see the introduction of chapter Transformations / 2D Transformations.

Attention

For speed reasons, the domain of the input image is ignored. The output image always has a complete rectangle as its domain.

Execution Information

Parameters

ImageImageImageImageimageimage (input_object)  (multichannel-)image(-array) objectHImageHObjectHImageHobject (byte* / int2* / uint2* / real*) *allowed for compute devices

Input image.

PolarTransImagePolarTransImagePolarTransImagePolarTransImagepolarTransImagepolar_trans_image (output_object)  (multichannel-)image(-array) objectHImageHObjectHImageHobject * (byte / int2 / uint2 / real)

Output image.

RowRowRowRowrowrow (input_control)  number HTupleUnion[int, float]HTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Row coordinate of the center of the arc.

Default: 256

Suggested values: 0, 16, 32, 64, 128, 240, 256, 480, 512

ColumnColumnColumnColumncolumncolumn (input_control)  number HTupleUnion[int, float]HTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Column coordinate of the center of the arc.

Default: 256

Suggested values: 0, 16, 32, 64, 128, 256, 320, 512, 640

AngleStartAngleStartAngleStartAngleStartangleStartangle_start (input_control)  angle.rad HTuplefloatHTupleHtuple (real) (double) (double) (double)

Angle of the ray to be mapped to the first column of the output image.

Default: 0.0

Suggested values: 0.0, 0.78539816, 1.57079632, 3.141592654, 6.2831853, 12.566370616

AngleEndAngleEndAngleEndAngleEndangleEndangle_end (input_control)  angle.rad HTuplefloatHTupleHtuple (real) (double) (double) (double)

Angle of the ray to be mapped to the last column of the output image.

Default: 6.2831853

Suggested values: 0.0, 0.78539816, 1.57079632, 3.141592654, 6.2831853, 12.566370616

RadiusStartRadiusStartRadiusStartRadiusStartradiusStartradius_start (input_control)  number HTupleUnion[int, float]HTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Radius of the circle to be mapped to the first row of the output image.

Default: 0

Suggested values: 0, 16, 32, 64, 100, 128, 256, 512

Value range: 0 ≤ RadiusStart RadiusStart RadiusStart RadiusStart radiusStart radius_start

RadiusEndRadiusEndRadiusEndRadiusEndradiusEndradius_end (input_control)  number HTupleUnion[int, float]HTupleHtuple (real / integer) (double / int / long) (double / Hlong) (double / Hlong)

Radius of the circle to be mapped to the last row of the output image.

Default: 100

Suggested values: 0, 16, 32, 64, 100, 128, 256, 512

Value range: 0 ≤ RadiusEnd RadiusEnd RadiusEnd RadiusEnd radiusEnd radius_end

WidthWidthWidthWidthwidthwidth (input_control)  extent.x HTupleintHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Width of the output image.

Default: 512

Suggested values: 256, 320, 512, 640, 800, 1024

Value range: 0 ≤ Width Width Width Width width width ≤ 32767

HeightHeightHeightHeightheightheight (input_control)  extent.y HTupleintHTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Height of the output image.

Default: 512

Suggested values: 240, 256, 480, 512, 600, 1024

Value range: 0 ≤ Height Height Height Height height height ≤ 32767

InterpolationInterpolationInterpolationInterpolationinterpolationinterpolation (input_control)  string HTuplestrHTupleHtuple (string) (string) (HString) (char*)

Interpolation method for the transformation.

Default: 'nearest_neighbor' "nearest_neighbor" "nearest_neighbor" "nearest_neighbor" "nearest_neighbor" "nearest_neighbor"

List of values: 'bilinear'"bilinear""bilinear""bilinear""bilinear""bilinear", 'nearest_neighbor'"nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor""nearest_neighbor"

See also

polar_trans_image_invpolar_trans_image_invPolarTransImageInvPolarTransImageInvPolarTransImageInvpolar_trans_image_inv, polar_trans_regionpolar_trans_regionPolarTransRegionPolarTransRegionPolarTransRegionpolar_trans_region, polar_trans_region_invpolar_trans_region_invPolarTransRegionInvPolarTransRegionInvPolarTransRegionInvpolar_trans_region_inv, polar_trans_contour_xldpolar_trans_contour_xldPolarTransContourXldPolarTransContourXldPolarTransContourXldpolar_trans_contour_xld, polar_trans_contour_xld_invpolar_trans_contour_xld_invPolarTransContourXldInvPolarTransContourXldInvPolarTransContourXldInvpolar_trans_contour_xld_inv

Module

Foundation