Use the tabs on the upper right to switch to a different programming language.

HSheetOfLightModel (Class)

Name

HSheetOfLightModel — Represents an instance of the data structure required to perform 3D measurements with the sheet-of-light technique.

Constructors

`ReadSheetOfLightModel`		Read a sheet-of-light model from a file and create a new model.
`CreateSheetOfLightModel`		Create a model to perform 3D-measurements using the sheet-of-light technique.

Methods

`ApplySheetOfLightCalibration`		Apply the calibration transformations to the input disparity image.
`CalibrateSheetOfLight`		Calibrate a sheet-of-light setup with a 3D calibration object.
`ClearSheetOfLightModel`		Delete a sheet-of-light model and free the allocated memory.
`CreateSheetOfLightModel`		Create a model to perform 3D-measurements using the sheet-of-light technique.
`DeserializeSheetOfLightModel`		Deserialize a sheet-of-light model.
`GetSheetOfLightParam`		Get the value of a parameter, which has been set in a sheet-of-light model.
`GetSheetOfLightResult`		Get the iconic results of a measurement performed with the sheet-of light technique.
`GetSheetOfLightResultObjectModel3d`		Get the result of a calibrated measurement performed with the sheet-of-light technique as a 3D object model.
`MeasureProfileSheetOfLight`		Process the profile image provided as input and store the resulting disparity to the sheet-of-light model.
`QuerySheetOfLightParams`		For a given sheet-of-light model get the names of the generic iconic or control parameters that can be used in the different sheet-of-light operators.
`ReadSheetOfLightModel`		Read a sheet-of-light model from a file and create a new model.
`ResetSheetOfLightModel`		Reset a sheet-of-light model.
`SerializeSheetOfLightModel`		Serialize a sheet-of-light model.
`SetProfileSheetOfLight`		Set sheet of light profiles by measured disparities.
`SetSheetOfLightParam`		Set selected parameters of the sheet-of-light model.
`WriteSheetOfLightModel`		Write a sheet-of-light model to a file.

HSheetOfLightModel (Class)

Name

HSheetOfLightModel — Represents an instance of the data structure required to perform 3D measurements with the sheet-of-light technique.

Constructors

`ReadSheetOfLightModel`		Read a sheet-of-light model from a file and create a new model.
`CreateSheetOfLightModel`		Create a model to perform 3D-measurements using the sheet-of-light technique.

Methods

`ApplySheetOfLightCalibration`		Apply the calibration transformations to the input disparity image.
`CalibrateSheetOfLight`		Calibrate a sheet-of-light setup with a 3D calibration object.
`ClearSheetOfLightModel`		Delete a sheet-of-light model and free the allocated memory.
`CreateSheetOfLightModel`		Create a model to perform 3D-measurements using the sheet-of-light technique.
`DeserializeSheetOfLightModel`		Deserialize a sheet-of-light model.
`GetSheetOfLightParam`		Get the value of a parameter, which has been set in a sheet-of-light model.
`GetSheetOfLightResult`		Get the iconic results of a measurement performed with the sheet-of light technique.
`GetSheetOfLightResultObjectModel3d`		Get the result of a calibrated measurement performed with the sheet-of-light technique as a 3D object model.
`MeasureProfileSheetOfLight`		Process the profile image provided as input and store the resulting disparity to the sheet-of-light model.
`QuerySheetOfLightParams`		For a given sheet-of-light model get the names of the generic iconic or control parameters that can be used in the different sheet-of-light operators.
`ReadSheetOfLightModel`		Read a sheet-of-light model from a file and create a new model.
`ResetSheetOfLightModel`		Reset a sheet-of-light model.
`SerializeSheetOfLightModel`		Serialize a sheet-of-light model.
`SetProfileSheetOfLight`		Set sheet of light profiles by measured disparities.
`SetSheetOfLightParam`		Set selected parameters of the sheet-of-light model.
`WriteSheetOfLightModel`		Write a sheet-of-light model to a file.

Operators