phase_degphase_degPhaseDegPhaseDegphase_deg (Operator)

Name

phase_degphase_degPhaseDegPhaseDegphase_deg — Return the phase of a complex image in degrees.

Signature

phase_deg(ImageComplex : ImagePhase : : )

Description

phase_degphase_degPhaseDegPhaseDegphase_deg computes the phase of a complex image in degrees. The following formula is used: Hence, ImagePhaseImagePhaseImagePhaseimagePhaseimage_phase contains half the phase angle. For negative phase angles, 180 is added.

Execution Information

Multithreading type: reentrant (runs in parallel with non-exclusive operators).
Multithreading scope: global (may be called from any thread).
Automatically parallelized on tuple level.
Automatically parallelized on channel level.
Automatically parallelized on domain level.

Parameters

ImageComplexImageComplexImageCompleximageCompleximage_complex (input_object) (multichannel-)image(-array) → object (complex)

Input image in frequency domain.

ImagePhaseImagePhaseImagePhaseimagePhaseimage_phase (output_object) image(-array) → object (direction)

Phase of the image in degrees.

Example (C)

read_image(&Image,"monkey");
disp_image(Image,WindowHandle);
fft_image(Image,&FFT);
phase_deg(FFT,&Phase);
disp_image(Phase,WindowHandle);

Result

phase_degphase_degPhaseDegPhaseDegphase_deg returns 2 ( H_MSG_TRUE) if the image is of correct type. If the input is empty the behavior can be set via set_system(::'no_object_result',<Result>:). If necessary, an exception is raised.