Procedures for Testing and Debugging

This procedure can be used to create a "ToolHandle" parameter.

The "ToolHandle" of a custom tool represents the ID of the tool. It is required in two cases: if interface procedures are used in the implementation of your custom tool and if you want to debug your custom tool in HDevelop. Displaying debugging information directly in the graphics window of HDevelop is only possible if a "ToolHandle" is available. It also enables you to check which interface procedures are called and queries which parameters were used in each procedure call. In addition, the returned information lists the time when the procedures were called.

To enable that the debugging information is stored, you have to create a "ToolHandle".

MeTest_create_tool_handle ( : : : ToolHandle )

Parameters

The procedure contains the following output parameter:

This procedure can be used to set the execution context of a tool to "Running". The procedure can be called in the HDevelop test program to simulate the execution of the custom tool within a running MERLIC Vision App. Thus, it enables you to check the behavior of the custom tool for the time period in which the MVApp is running. This might be useful if your custom tool is meant to perform a specific action when the MVApp is executed, e.g., if a result should be written to an external file.

This procedure only simulates the execution of the custom tool for the case that the execution of the MVApp was triggered explicitly, e.g., by clicking the respective buttons in the MERLIC Creator. All other types of executions, e.g., executions that are triggered automatically by changing the value of a tool parameter or by loading the tool in the MERLIC Creator, are not simulated. If you want to test the behavior of the custom tool for these type of executions, you can use the procedure MeTest_set_execution_context_to_unknown.

MeTest_set_execution_context_to_running ( : : ToolHandle : )

Parameters

The procedure contains the following input parameter:

This procedure can be used to set the execution context of a tool to "Unknown". The procedure can be called in the HDevelop test program to simulate executions of the custom tool that were not triggered by starting the execution of the MVApp, e.g., executions that were triggered automatically by changing the value of a tool parameter in the MERLIC Creator. Thus, it enables you to check the behavior of the custom tool for all types of executions that are triggered automatically as side effect of some other processes. This might be useful if your custom tool is meant to perform a specific action only when the MVApp is executed explicitly, e.g., if a result should be written to an external file. You can then use the procedure MeTest_set_execution_context_to_running to check if the desired action is performed correctly for the case that the execution is triggered explicitly and you can use the procedure MeTest_set_execution_context_to_unknown to check if the respective action is not performed, as desired, when the execution is triggered automatically for all other cases.

MeTest_set_execution_context_to_running ( : : ToolHandle : )

Parameters

The procedure contains the following input parameter: