MVTec Software GmbH

Tutorial Videos

MVTec's channel on YouTube
Click here to subscribe to our YouTube channel!

On this page you will find various tutorial videos for our software products HALCON and MERLIC.

If you are completely new to HALCON or MERLIC, these are a few tutorial recommendations to get you started:

04. Sep 2019 Videos

Draw oriented rectangles with the MVTec Deep Learning Tool

Many computer programs often offer the option to draw axis-aligned rectangles but not to draw oriented rectangles.

Thus, we developed a method that...

28. Aug 2019 Videos

Stereo calibration with MVTec HALCON

In this tutorial, you’ll learn how to calibrate a camera setup with two or more cameras. First, you’ll get some hints about what needs to be...

07. Jun 2019 Videos

Integrate HDevelop code into a C++ application using the Library Project Export

In this tutorial, you will learn how to integrate machine vision code that you developed with HDevelop into an existing C++ Visual Studio application....

28. May 2019 Videos

Edge-supported Surface-based 3D-Matching with MVTec HALCON

In this tutorial, you will learn how to extend the functionality of surface-based matching with MVTec HALCON by also using edges of objects in the 3D...

28. May 2019 Videos

Optimize your 3D Data for Surface-based 3D-Matching with MVTec HALCON

In this tutorial, you will learn how to optimize your surface-based matching results with MVTec HALCON by properly preparing the 3D input data.


05. Apr 2019 Videos

Introduction to Surface-based Matching with MVTec HALCON

This tutorial introduces surface-based matching with MVTec HALCON.

Surface-based matching can be used to locate objects using a 3D sensor. As an...

08. Mar 2019 MERLIC Videos

Check the fill height of a cookie box in 3D data with MVTec MERLIC

In this video, we create an application using the height image tools that were introduced in MVTec MERLIC 4.

The goal of the application is to check...

01. Feb 2019 HALCON Videos

Hand-eye calibration with MVTec HALCON (stationary 2D camera)

In this tutorial, we use HDevelop to perform a hand-eye calibration. This hand-eye calibration is necessary to pick and place objects, which are...

01. Feb 2019 HALCON Videos

Pick and place with shape-based matching (stationary 2D camera)

In this tutorial, we use shape-based matching to locate an object on a planar surface. Then, we teach a robot how to approach the object. In a...

22. Nov 2018 HALCON Videos

Debugging an MVTec HDevEngine application running on an embedded device

In this video, we run an MVTec HDevEngine machine vision application on a Raspberry Pi, an Arm®-based embedded device. The application returns the...