ClassesClasses | | Operators

clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModels (Operator)

Name

clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModels — Delete all metrology models and free the allocated memory.

Warning

clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModels is obsolete and is only provided for reasons of backward compatibility. New applications should not use clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModels.

Signature

clear_all_metrology_models( : : : )

Herror clear_all_metrology_models()

Herror T_clear_all_metrology_models()

void ClearAllMetrologyModels()

static void HOperatorSet.ClearAllMetrologyModels()

Description

clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModels deletes all metrology models that were created by create_metrology_modelcreate_metrology_modelCreateMetrologyModelCreateMetrologyModelCreateMetrologyModel, copy_metrology_modelcopy_metrology_modelCopyMetrologyModelCopyMetrologyModelCopyMetrologyModel, read_metrology_modelread_metrology_modelReadMetrologyModelReadMetrologyModelReadMetrologyModel, or deserialize_metrology_modeldeserialize_metrology_modelDeserializeMetrologyModelDeserializeMetrologyModelDeserializeMetrologyModel. All memory used by the models is freed. After the operator call, all metrology handles are invalid.

For an explanation of the concept of 2D metrology see the introduction of chapter 2D Metrology.

Attention

clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModels exists solely for the purpose of implementing the “reset program” functionality in HDevelop. clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModels must not be used in any application.

Execution Information

Result

The operator clear_all_metrology_modelsclear_all_metrology_modelsClearAllMetrologyModelsClearAllMetrologyModelsClearAllMetrologyModels returns the value 2 (H_MSG_TRUE) if all metrology models were freed correctly. Otherwise, an exception will be raised.

Module

2D Metrology


ClassesClasses | | Operators