HALCON Website / HALCON Operator-Referenz / OCR / Trainingsdateien
KlassenKlassenKlassenKlassen | | | | Operatoren

read_ocr_trainf_namesread_ocr_trainf_namesReadOcrTrainfNamesread_ocr_trainf_namesReadOcrTrainfNamesReadOcrTrainfNames (Operator)

Name

read_ocr_trainf_namesread_ocr_trainf_namesReadOcrTrainfNamesread_ocr_trainf_namesReadOcrTrainfNamesReadOcrTrainfNames — Abfragen der Zeichen, die in Trainings-Dateien abgelegt sind.

Signatur

read_ocr_trainf_names( : : TrainingFile : CharacterNames, CharacterCount)

Herror read_ocr_trainf_names(const char* TrainingFile, char* CharacterNames, Hlong* CharacterCount)

Herror T_read_ocr_trainf_names(const Htuple TrainingFile, Htuple* CharacterNames, Htuple* CharacterCount)

Herror read_ocr_trainf_names(const HTuple& TrainingFile, char* CharacterNames, Hlong* CharacterCount)

Herror read_ocr_trainf_names(const HTuple& TrainingFile, HTuple* CharacterNames, HTuple* CharacterCount)

void ReadOcrTrainfNames(const HTuple& TrainingFile, HTuple* CharacterNames, HTuple* CharacterCount)

static HTuple HMisc::ReadOcrTrainfNames(const HTuple& TrainingFile, HTuple* CharacterCount)

static HString HMisc::ReadOcrTrainfNames(const HString& TrainingFile, Hlong* CharacterCount)

static HString HMisc::ReadOcrTrainfNames(const char* TrainingFile, Hlong* CharacterCount)

void HOperatorSetX.ReadOcrTrainfNames(
[in] VARIANT TrainingFile, [out] VARIANT* CharacterNames, [out] VARIANT* CharacterCount)

VARIANT HMiscX.ReadOcrTrainfNames(
[in] VARIANT TrainingFile, [out] VARIANT* CharacterCount)

static void HOperatorSet.ReadOcrTrainfNames(HTuple trainingFile, out HTuple characterNames, out HTuple characterCount)

static HTuple HMisc.ReadOcrTrainfNames(HTuple trainingFile, out HTuple characterCount)

static string HMisc.ReadOcrTrainfNames(string trainingFile, out int characterCount)

Beschreibung

read_ocr_trainf_namesread_ocr_trainf_namesReadOcrTrainfNamesread_ocr_trainf_namesReadOcrTrainfNamesReadOcrTrainfNames bestimmt die Namen aller Zeichen und deren Anzahl in den angegebenen Trainings-Dateien.

Parallelisierung

Parameter

TrainingFileTrainingFileTrainingFileTrainingFileTrainingFiletrainingFile (input_control)  filename.read(-array) → HTupleHTupleHTupleVARIANTHtuple (string) (string) (HString) (char*) (BSTR) (char*)

Namen der Trainingsdateien.

Defaultwert: '' "" "" "" "" ""

Dateiendung: .trf, .otr

CharacterNamesCharacterNamesCharacterNamesCharacterNamesCharacterNamescharacterNames (output_control)  string(-array) → HTupleHTupleHTupleVARIANTHtuple (string) (string) (HString) (char*) (BSTR) (char*)

Bezeichnung der eingelesenen Zeichen.

CharacterCountCharacterCountCharacterCountCharacterCountCharacterCountcharacterCount (output_control)  integer(-array) → HTupleHTupleHTupleVARIANTHtuple (integer) (int / long) (Hlong) (Hlong) (Hlong) (Hlong)

Anzahl der jeweiligen Zeichen.

Ergebnis

Sind die Parameterwerte korrekt, dann liefert read_ocr_trainf_namesread_ocr_trainf_namesReadOcrTrainfNamesread_ocr_trainf_namesReadOcrTrainfNamesReadOcrTrainfNames den Wert 2 (H_MSG_TRUE). Andernfalls wird eine Fehlerbehandlung durchgeführt.

Vorgänger

write_ocr_trainfwrite_ocr_trainfWriteOcrTrainfwrite_ocr_trainfWriteOcrTrainfWriteOcrTrainf

Siehe auch

trainf_ocr_class_svmtrainf_ocr_class_svmTrainfOcrClassSvmtrainf_ocr_class_svmTrainfOcrClassSvmTrainfOcrClassSvm, trainf_ocr_class_mlptrainf_ocr_class_mlpTrainfOcrClassMlptrainf_ocr_class_mlpTrainfOcrClassMlpTrainfOcrClassMlp

Modul

OCR/OCV

KlassenKlassenKlassenKlassen | | | | Operatoren
HALCON Operator-Referenz 13.0.4 Copyright © 1996-2019 MVTec Software GmbH