get_bead_inspection_paramT_get_bead_inspection_paramGetBeadInspectionParamGetBeadInspectionParam (Operator)
Name
get_bead_inspection_paramT_get_bead_inspection_paramGetBeadInspectionParamGetBeadInspectionParam
— Abfragen der Parameter eines Modells zur Inspektion von Kleberaupen.
Signatur
Beschreibung
Mit dem Operator get_bead_inspection_paramget_bead_inspection_paramGetBeadInspectionParamGetBeadInspectionParamGetBeadInspectionParam
können die Werte der
Parameter des Modells BeadInspectionModelBeadInspectionModelBeadInspectionModelBeadInspectionModelbeadInspectionModel
abgefragt werden.
Es können alle Parameter abgefragt werden, die mit
set_bead_inspection_paramset_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamSetBeadInspectionParam
gesetzt werden können. Mehrere Parameter
können mit einem einzigen Aufruf abgefragt werden.
Ausführungsinformationen
- Multithreading-Typ: reentrant (läuft parallel zu nicht-exklusiven Operatoren).
- Multithreading-Bereich: global (kann von jedem Thread aufgerufen werden).
- Wird ohne Parallelisierung verarbeitet.
Parameter
BeadInspectionModelBeadInspectionModelBeadInspectionModelBeadInspectionModelbeadInspectionModel
(input_control) bead_inspection_model →
HBeadInspectionModel, HTupleHTupleHtuple (handle) (IntPtr) (HHandle) (handle)
Handle des Modells zur Kleberaupeninspektion.
GenParamNameGenParamNameGenParamNameGenParamNamegenParamName
(input_control) attribute.name(-array) →
HTupleHTupleHtuple (string) (string) (HString) (char*)
Name des abzufragenden Parameters.
Defaultwert:
'target_thickness'
"target_thickness"
"target_thickness"
"target_thickness"
"target_thickness"
Werteliste: 'polarity'"polarity""polarity""polarity""polarity", 'position_tolerance'"position_tolerance""position_tolerance""position_tolerance""position_tolerance", 'sigma'"sigma""sigma""sigma""sigma", 'target_thickness'"target_thickness""target_thickness""target_thickness""target_thickness", 'thickness_tolerance'"thickness_tolerance""thickness_tolerance""thickness_tolerance""thickness_tolerance", 'threshold'"threshold""threshold""threshold""threshold"
GenParamValueGenParamValueGenParamValueGenParamValuegenParamValue
(output_control) attribute.value(-array) →
HTupleHTupleHtuple (integer / real / string) (int / long / double / string) (Hlong / double / HString) (Hlong / double / char*)
Wert des Parameters.
Ergebnis
Der Operator get_bead_inspection_paramget_bead_inspection_paramGetBeadInspectionParamGetBeadInspectionParamGetBeadInspectionParam
gibt 2 (H_MSG_TRUE) zurück, sofern
alle Parameter korrekt sind. Andernfalls wird eine Fehlerbehandlung
ausgelöst.
Vorgänger
create_bead_inspection_modelcreate_bead_inspection_modelCreateBeadInspectionModelCreateBeadInspectionModelCreateBeadInspectionModel
,
set_bead_inspection_paramset_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamSetBeadInspectionParam
Nachfolger
apply_bead_inspection_modelapply_bead_inspection_modelApplyBeadInspectionModelApplyBeadInspectionModelApplyBeadInspectionModel
,
set_bead_inspection_paramset_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamSetBeadInspectionParam
Siehe auch
create_bead_inspection_modelcreate_bead_inspection_modelCreateBeadInspectionModelCreateBeadInspectionModelCreateBeadInspectionModel
,
set_bead_inspection_paramset_bead_inspection_paramSetBeadInspectionParamSetBeadInspectionParamSetBeadInspectionParam
Modul
2D Metrology