classify_image_class_svm
— Classify an image with a support vector machine.
classify_image_class_svm(Image : ClassRegions : SVMHandle : )
classify_image_class_svm
performs a pixel classification
with the support vector machine (SVM) SVMHandle
on the
multichannel image Image
. Before calling
classify_image_class_svm
the SVM must be trained with
train_class_svm
. Image
must have
NumFeatures
channels, as specified with
create_class_svm
. On output, ClassRegions
contains
NumClasses
regions as the result of the classification. Note
that the order of the regions that are returned in
ClassRegions
corresponds to the order of the classes as
defined by the training regions in
add_samples_image_class_svm
.
To prevent that the SVM assigns pixels that lie outside the
convex hull of the training data in the feature space to one of the
classes, it is useful in many cases to explicitly train a rejection
class by adding samples for the rejection class with
add_samples_image_class_svm
and by re-training the SVM with
train_class_svm
.
An alternative for explicitly defining a rejection class is to use an SVM in
the mode 'novelty-detection' . Please refer to the description in
create_class_svm
and add_samples_image_class_svm
.
Image
(input_object) (multichannel-)image →
object (byte / cyclic / direction / int1 / int2 / uint2 / int4 / real)
Input image.
ClassRegions
(output_object) region-array →
object
Segmented classes.
SVMHandle
(input_control) class_svm →
(handle)
SVM handle.
read_image (Image, 'ic') gen_rectangle1 (Board, 20, 270, 160, 420) gen_rectangle1 (Capacitor, 359, 263, 371, 302) gen_rectangle1 (Resistor, 200, 252, 290, 256) gen_rectangle1 (IC, 180, 135, 216, 165) concat_obj (Board, Capacitor, Classes) concat_obj (Classes, Resistor, Classes) concat_obj (Classes, IC, Classes) create_class_svm (3, 'rbf', 0.01, 0.01, 4, 'one-versus-all', \ 'normalization', 3, SVMHandle) add_samples_image_class_svm (Image, Classes, SVMHandle) train_class_svm (SVMHandle, 0.001, 'default') reduce_class_svm (SVMHandle, 'bottom_up', 2, 0.01, SVMHandleReduced) classify_image_class_svm (Image, ClassRegions, SVMHandleReduced) dev_display (ClassRegions)
If the parameters are valid the operator
classify_image_class_svm
returns the value 2 (
H_MSG_TRUE)
. If
necessary, an exception is raised.
train_class_svm
,
read_class_svm
,
reduce_class_svm
classify_image_class_gmm
,
classify_image_class_knn
,
classify_image_class_mlp
,
classify_image_class_lut
,
class_ndim_norm
,
class_2dim_sup
add_samples_image_class_svm
,
create_class_svm
Foundation