HMisc (Class)

Name

HMisc — Class grouping methods belonging to no other HALCON class.

Methods

`AbsInvarFourierCoeff`		Normalizing of the Fourier coefficients with respect to the displacment of the starting point.
`AngleLl`		Calculate the angle between two lines.
`AngleLx`		Calculate the angle between one line and the horizontal axis.
`ApproxChain`		Approximate a contour by arcs and lines.
`ApproxChainSimple`		Approximate a contour by arcs and lines.
`CaltabPoints`		Read the mark center points from the calibration plate description file.
`ChangeRadialDistortionCamPar`		Determine new camera parameters in accordance to the specified radial distortion.
`CloseAllBgEsti`		Delete all background estimation data sets.
`CloseAllClassBox`		Destroy all classifiers.
`CloseAllFiles`		Close all open files.
`CloseAllFramegrabbers`		Close all image acquisition devices.
`CloseAllMeasures`		Delete all measure objects.
`CloseAllOcrs`		Destroy all OCR classifiers.
`CloseAllOcvs`		Clear all OCV tools.
`CloseAllSerials`		Close all serial devices.
`ConcatOcrTrainf`		Concat training files.
`ConvertPoint3dCartToSpher`		Convert Cartesian coordinates of a 3D point to spherical coordinates.
`ConvertPoint3dSpherToCart`		Convert spherical coordinates of a 3D point to Cartesian coordinates.
`CopyFile`		Copy a file to a new location.
`CreateCaltab`		Generate a calibration plate description file and a corresponding PostScript file. (obsolete)
`CreateRectificationGrid`		Generate a PostScript file, which describes the rectification grid.
`DeleteFile`		Delete a file.
`DeserializeCamPar`		Deserialize the serialized internal camera parameters.
`DeserializeFftOptimizationData`		Deserialize FFT speed optimization data.
`DistancePl`		Calculate the distance between one point and one line.
`DistancePp`		Calculate the distance between two points.
`DistancePs`		Calculate the distances between a point and a line segment.
`DistanceSl`		Calculate the distances between a line segment and a line.
`DistanceSs`		Calculate the distances between two line segments.
`FileExists`		Check whether file exists.
`FilterKalman`		Estimate the current state of a system with the help of the Kalman filtering.
`Fourier1dim`		Calculate the Fourier coefficients of a parameterized contour.
`Fourier1dimInv`		One dimensional Fourier synthesis (inverse Fourier transform).
`GaussDistribution`		Generate a Gaussian noise distribution.
`GenArbitraryDistortionMap`		Generate a projection map that describes the mapping between an arbitrarily distorted image and the rectified image.
`GenCaltab`		Generate a calibration plate description file and a corresponding PostScript file.
`GetLineOfSight`		Compute the line of sight corresponding to a point in the image.
`GetPointsEllipse`		Calculate a point of an ellipse corresponding to a specific angle.
`ImagePointsToWorldPlane`		Transform image points into the plane z=0 of a world coordinate system.
`InfoEdges`		Estimate the width of a filter in edges_imageedges_imageEdgesImageedges_imageEdgesImageEdgesImage.
`InfoSmooth`		Information on smoothing filter smooth_imagesmooth_imageSmoothImagesmooth_imageSmoothImageSmoothImage.
`IntersectLinesOfSight`		Get a 3D point from the intersection of two lines of sight within a binocular camera system.
`IntersectionLl`		Calculate the intersection point of two lines.
`InvarFourierCoeff`		Normalize the Fourier coefficients.
`LineOrientation`		Calculate the orientation of lines.
`LinePosition`		Calculate the center of gravity, length, and orientation of a line.
`ListFiles`		List all files in a directory.
`MakeDir`		Make a directory.
`MatchFourierCoeff`		Similarity of two contours.
`MoveContourOrig`		Transformation of the origin into the centre of gravity.
`OptimizeFftSpeed`		Optimize the runtime of the FFT.
`OptimizeRftSpeed`		Optimize the runtime of the real-valued FFT.
`PartitionLines`		Partition lines according to various criteria.
`PrepContourFourier`		Parameterize the passed contour.
`Project3dPoint`		Project 3D points into (sub-)pixel image coordinates.
`ProjectionPl`		Calculate the projection of a point onto a line.
`ReadCamPar`		Read the internal camera parameters from a text file.
`ReadFftOptimizationData`		Load FFT speed optimization data from a file.
`ReadKalman`		Read the description file of a Kalman filter.
`ReadOcrTrainfNames`		Query which characters are stored in a training file.
`ReadOcrTrainfNamesProtected`		Query which characters are stored in a (protected) training file.
`ReadTuple`		Read a tuple from a file.
`RemoveDir`		Delete an empty directory.
`SelectLines`		Select lines according to various criteria.
`SelectLinesLongest`		Select the longest input lines.
`SerializeCamPar`		Serialize the internal camera parameters.
`SerializeFftOptimizationData`		Serialize FFT speed optimization data.
`SpDistribution`		Generate a salt-and-pepper noise distribution.
`UpdateKalman`		Read an update file of a Kalman filter.
`WriteCamPar`		Write the internal camera parameters to a text file.
`WriteFftOptimizationData`		Store FFT speed optimization data in a file.
`WriteTuple`		Write a tuple to a file.

HMisc (Class)

Name

HMisc — Class grouping methods belonging to no other HALCON class.

Methods

`AbsInvarFourierCoeff`		Normalizing of the Fourier coefficients with respect to the displacment of the starting point.
`AngleLl`		Calculate the angle between two lines.
`AngleLx`		Calculate the angle between one line and the horizontal axis.
`ApproxChain`		Approximate a contour by arcs and lines.
`ApproxChainSimple`		Approximate a contour by arcs and lines.
`CaltabPoints`		Read the mark center points from the calibration plate description file.
`ChangeRadialDistortionCamPar`		Determine new camera parameters in accordance to the specified radial distortion.
`CloseAllBgEsti`		Delete all background estimation data sets.
`CloseAllClassBox`		Destroy all classifiers.
`CloseAllFiles`		Close all open files.
`CloseAllFramegrabbers`		Close all image acquisition devices.
`CloseAllMeasures`		Delete all measure objects.
`CloseAllOcrs`		Destroy all OCR classifiers.
`CloseAllOcvs`		Clear all OCV tools.
`CloseAllSerials`		Close all serial devices.
`ConcatOcrTrainf`		Concat training files.
`ConvertPoint3dCartToSpher`		Convert Cartesian coordinates of a 3D point to spherical coordinates.
`ConvertPoint3dSpherToCart`		Convert spherical coordinates of a 3D point to Cartesian coordinates.
`CopyFile`		Copy a file to a new location.
`CreateCaltab`		Generate a calibration plate description file and a corresponding PostScript file. (obsolete)
`CreateRectificationGrid`		Generate a PostScript file, which describes the rectification grid.
`DeleteFile`		Delete a file.
`DeserializeCamPar`		Deserialize the serialized internal camera parameters.
`DeserializeFftOptimizationData`		Deserialize FFT speed optimization data.
`DistancePl`		Calculate the distance between one point and one line.
`DistancePp`		Calculate the distance between two points.
`DistancePs`		Calculate the distances between a point and a line segment.
`DistanceSl`		Calculate the distances between a line segment and a line.
`DistanceSs`		Calculate the distances between two line segments.
`FileExists`		Check whether file exists.
`FilterKalman`		Estimate the current state of a system with the help of the Kalman filtering.
`Fourier1dim`		Calculate the Fourier coefficients of a parameterized contour.
`Fourier1dimInv`		One dimensional Fourier synthesis (inverse Fourier transform).
`GaussDistribution`		Generate a Gaussian noise distribution.
`GenArbitraryDistortionMap`		Generate a projection map that describes the mapping between an arbitrarily distorted image and the rectified image.
`GenCaltab`		Generate a calibration plate description file and a corresponding PostScript file.
`GetLineOfSight`		Compute the line of sight corresponding to a point in the image.
`GetPointsEllipse`		Calculate a point of an ellipse corresponding to a specific angle.
`ImagePointsToWorldPlane`		Transform image points into the plane z=0 of a world coordinate system.
`InfoEdges`		Estimate the width of a filter in edges_imageedges_imageEdgesImageedges_imageEdgesImageEdgesImage.
`InfoSmooth`		Information on smoothing filter smooth_imagesmooth_imageSmoothImagesmooth_imageSmoothImageSmoothImage.
`IntersectLinesOfSight`		Get a 3D point from the intersection of two lines of sight within a binocular camera system.
`IntersectionLl`		Calculate the intersection point of two lines.
`InvarFourierCoeff`		Normalize the Fourier coefficients.
`LineOrientation`		Calculate the orientation of lines.
`LinePosition`		Calculate the center of gravity, length, and orientation of a line.
`ListFiles`		List all files in a directory.
`MakeDir`		Make a directory.
`MatchFourierCoeff`		Similarity of two contours.
`MoveContourOrig`		Transformation of the origin into the centre of gravity.
`OptimizeFftSpeed`		Optimize the runtime of the FFT.
`OptimizeRftSpeed`		Optimize the runtime of the real-valued FFT.
`PartitionLines`		Partition lines according to various criteria.
`PrepContourFourier`		Parameterize the passed contour.
`Project3dPoint`		Project 3D points into (sub-)pixel image coordinates.
`ProjectionPl`		Calculate the projection of a point onto a line.
`ReadCamPar`		Read the internal camera parameters from a text file.
`ReadFftOptimizationData`		Load FFT speed optimization data from a file.
`ReadKalman`		Read the description file of a Kalman filter.
`ReadOcrTrainfNames`		Query which characters are stored in a training file.
`ReadOcrTrainfNamesProtected`		Query which characters are stored in a (protected) training file.
`ReadTuple`		Read a tuple from a file.
`RemoveDir`		Delete an empty directory.
`SelectLines`		Select lines according to various criteria.
`SelectLinesLongest`		Select the longest input lines.
`SerializeCamPar`		Serialize the internal camera parameters.
`SerializeFftOptimizationData`		Serialize FFT speed optimization data.
`SpDistribution`		Generate a salt-and-pepper noise distribution.
`UpdateKalman`		Read an update file of a Kalman filter.
`WriteCamPar`		Write the internal camera parameters to a text file.
`WriteFftOptimizationData`		Store FFT speed optimization data in a file.
`WriteTuple`		Write a tuple to a file.

HMiscX (Class)

Name

HMiscX — Class grouping methods belonging to no other HALCON class.

Methods

`AbsInvarFourierCoeff`		Normalizing of the Fourier coefficients with respect to the displacment of the starting point.
`AngleLl`		Calculate the angle between two lines.
`AngleLx`		Calculate the angle between one line and the horizontal axis.
`ApproxChain`		Approximate a contour by arcs and lines.
`ApproxChainSimple`		Approximate a contour by arcs and lines.
`CaltabPoints`		Read the mark center points from the calibration plate description file.
`ChangeRadialDistortionCamPar`		Determine new camera parameters in accordance to the specified radial distortion.
`CloseAllBgEsti`		Delete all background estimation data sets.
`CloseAllClassBox`		Destroy all classifiers.
`CloseAllFiles`		Close all open files.
`CloseAllFramegrabbers`		Close all image acquisition devices.
`CloseAllMeasures`		Delete all measure objects.
`CloseAllOcrs`		Destroy all OCR classifiers.
`CloseAllOcvs`		Clear all OCV tools.
`CloseAllSerials`		Close all serial devices.
`ConcatOcrTrainf`		Concat training files.
`ConvertPoint3dCartToSpher`		Convert Cartesian coordinates of a 3D point to spherical coordinates.
`ConvertPoint3dSpherToCart`		Convert spherical coordinates of a 3D point to Cartesian coordinates.
`CopyFile`		Copy a file to a new location.
`CreateCaltab`		Generate a calibration plate description file and a corresponding PostScript file. (obsolete)
`CreateRectificationGrid`		Generate a PostScript file, which describes the rectification grid.
`DeleteFile`		Delete a file.
`DeserializeCamPar`		Deserialize the serialized internal camera parameters.
`DeserializeFftOptimizationData`		Deserialize FFT speed optimization data.
`DistancePl`		Calculate the distance between one point and one line.
`DistancePp`		Calculate the distance between two points.
`DistancePs`		Calculate the distances between a point and a line segment.
`DistanceSl`		Calculate the distances between a line segment and a line.
`DistanceSs`		Calculate the distances between two line segments.
`FileExists`		Check whether file exists.
`FilterKalman`		Estimate the current state of a system with the help of the Kalman filtering.
`Fourier1dim`		Calculate the Fourier coefficients of a parameterized contour.
`Fourier1dimInv`		One dimensional Fourier synthesis (inverse Fourier transform).
`GaussDistribution`		Generate a Gaussian noise distribution.
`GenArbitraryDistortionMap`		Generate a projection map that describes the mapping between an arbitrarily distorted image and the rectified image.
`GenCaltab`		Generate a calibration plate description file and a corresponding PostScript file.
`GetLineOfSight`		Compute the line of sight corresponding to a point in the image.
`GetPointsEllipse`		Calculate a point of an ellipse corresponding to a specific angle.
`ImagePointsToWorldPlane`		Transform image points into the plane z=0 of a world coordinate system.
`InfoEdges`		Estimate the width of a filter in edges_imageedges_imageEdgesImageedges_imageEdgesImageEdgesImage.
`InfoSmooth`		Information on smoothing filter smooth_imagesmooth_imageSmoothImagesmooth_imageSmoothImageSmoothImage.
`IntersectLinesOfSight`		Get a 3D point from the intersection of two lines of sight within a binocular camera system.
`IntersectionLl`		Calculate the intersection point of two lines.
`InvarFourierCoeff`		Normalize the Fourier coefficients.
`LineOrientation`		Calculate the orientation of lines.
`LinePosition`		Calculate the center of gravity, length, and orientation of a line.
`ListFiles`		List all files in a directory.
`MakeDir`		Make a directory.
`MatchFourierCoeff`		Similarity of two contours.
`MoveContourOrig`		Transformation of the origin into the centre of gravity.
`OptimizeFftSpeed`		Optimize the runtime of the FFT.
`OptimizeRftSpeed`		Optimize the runtime of the real-valued FFT.
`PartitionLines`		Partition lines according to various criteria.
`PrepContourFourier`		Parameterize the passed contour.
`Project3dPoint`		Project 3D points into (sub-)pixel image coordinates.
`ProjectionPl`		Calculate the projection of a point onto a line.
`ReadCamPar`		Read the internal camera parameters from a text file.
`ReadFftOptimizationData`		Load FFT speed optimization data from a file.
`ReadKalman`		Read the description file of a Kalman filter.
`ReadOcrTrainfNames`		Query which characters are stored in a training file.
`ReadOcrTrainfNamesProtected`		Query which characters are stored in a (protected) training file.
`ReadTuple`		Read a tuple from a file.
`RemoveDir`		Delete an empty directory.
`SelectLines`		Select lines according to various criteria.
`SelectLinesLongest`		Select the longest input lines.
`SerializeCamPar`		Serialize the internal camera parameters.
`SerializeFftOptimizationData`		Serialize FFT speed optimization data.
`SpDistribution`		Generate a salt-and-pepper noise distribution.
`UpdateKalman`		Read an update file of a Kalman filter.
`WriteCamPar`		Write the internal camera parameters to a text file.
`WriteFftOptimizationData`		Store FFT speed optimization data in a file.
`WriteTuple`		Write a tuple to a file.