Name
area_center_points_xldarea_center_points_xldAreaCenterPointsXldarea_center_points_xldAreaCenterPointsXldAreaCenterPointsXld — Area and center of gravity (centroid) of contours and polygons
treated as point clouds.
Herror area_center_points_xld(const Hobject XLD, double* Area, double* Row, double* Column)
Herror T_area_center_points_xld(const Hobject XLD, Htuple* Area, Htuple* Row, Htuple* Column)
area_center_points_xldarea_center_points_xldAreaCenterPointsXldarea_center_points_xldAreaCenterPointsXldAreaCenterPointsXld calculates the area and center of
gravity (centroid) of the point clouds given by contours or polygons
XLDXLDXLDXLDXLDXLD (i.e., the order of the points in the contour or
polygon is not taken into account). The area corresponds to the
number of points in the point cloud. The centroid is given by the
arithmetic mean of all points. If the contour or polygon is closed
(end point = start point), the end point of the contour or polygon is
not taken into account to avoid that it receives twice the weight of
the other points.
area_center_points_xldarea_center_points_xldAreaCenterPointsXldarea_center_points_xldAreaCenterPointsXldAreaCenterPointsXld should be used if the contour XLDXLDXLDXLDXLDXLD
intersects itself or if it is not possible to close the contour using a line
from end to start point without self-intersection, because in this case
area_center_xldarea_center_xldAreaCenterXldarea_center_xldAreaCenterXldAreaCenterXld does not produce useful results. To test whether the
contours or polygons intersect themselves,
test_self_intersection_xldtest_self_intersection_xldTestSelfIntersectionXldtest_self_intersection_xldTestSelfIntersectionXldTestSelfIntersectionXld can be used.
If more than one contour or polygon is passed, the results are stored
in tuples in the same order as the respective contours or polygons in
XLDXLDXLDXLDXLDXLD.
Even if the contour or polygon XLDXLDXLDXLDXLDXLD is not intersecting itself, the
result of area_center_points_xldarea_center_points_xldAreaCenterPointsXldarea_center_points_xldAreaCenterPointsXldAreaCenterPointsXld significantly differs from the
result of area_center_xldarea_center_xldAreaCenterXldarea_center_xldAreaCenterXldAreaCenterXld as it is calculated from the point cloud
and not from the enclosed region.
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Automatically parallelized on tuple level.
Point clouds to be examined in form of contours or
polygons.
Row coordinate of the centroid.
Column coordinate of the centroid.
Let n be the number of points of the contour or polygon.
Then the run time is O(n).
area_center_points_xldarea_center_points_xldAreaCenterPointsXldarea_center_points_xldAreaCenterPointsXldAreaCenterPointsXld returns 2 (H_MSG_TRUE) if the input is not
empty. If the input is empty the behavior can be set via
set_system(::'no_object_result',<Result>:)set_system("no_object_result",<Result>)SetSystem("no_object_result",<Result>)set_system("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>). If necessary,
an exception is raised.
gen_contours_skeleton_xldgen_contours_skeleton_xldGenContoursSkeletonXldgen_contours_skeleton_xldGenContoursSkeletonXldGenContoursSkeletonXld,
smooth_contours_xldsmooth_contours_xldSmoothContoursXldsmooth_contours_xldSmoothContoursXldSmoothContoursXld,
gen_polygons_xldgen_polygons_xldGenPolygonsXldgen_polygons_xldGenPolygonsXldGenPolygonsXld
area_center_xldarea_center_xldAreaCenterXldarea_center_xldAreaCenterXldAreaCenterXld
moments_points_xldmoments_points_xldMomentsPointsXldmoments_points_xldMomentsPointsXldMomentsPointsXld,
moments_any_points_xldmoments_any_points_xldMomentsAnyPointsXldmoments_any_points_xldMomentsAnyPointsXldMomentsAnyPointsXld,
area_centerarea_centerAreaCenterarea_centerAreaCenterAreaCenter,
moments_region_2ndmoments_region_2ndMomentsRegion2ndmoments_region_2ndMomentsRegion2ndMomentsRegion2nd
Foundation