Name
dist_rectangle2_contour_points_xldT_dist_rectangle2_contour_points_xldDistRectangle2ContourPointsXlddist_rectangle2_contour_points_xldDistRectangle2ContourPointsXldDistRectangle2ContourPointsXld — Compute the distances of all contour points to a rectangle.
Herror dist_rectangle2_contour_points_xld(Hobject Contour, const HTuple& ClippingEndPoints, const HTuple& Row, const HTuple& Column, const HTuple& Phi, const HTuple& Length1, const HTuple& Length2, HTuple* Distances)
HTuple HXLDCont::DistRectangle2ContourPointsXld(const HTuple& ClippingEndPoints, const HTuple& Row, const HTuple& Column, const HTuple& Phi, const HTuple& Length1, const HTuple& Length2) const
void DistRectangle2ContourPointsXld(const HObject& Contour, const HTuple& ClippingEndPoints, const HTuple& Row, const HTuple& Column, const HTuple& Phi, const HTuple& Length1, const HTuple& Length2, HTuple* Distances)
HTuple HXLDCont::DistRectangle2ContourPointsXld(Hlong ClippingEndPoints, double Row, double Column, double Phi, double Length1, double Length2) const
void HOperatorSetX.DistRectangle2ContourPointsXld(
[in] IHUntypedObjectX* Contour, [in] VARIANT ClippingEndPoints, [in] VARIANT Row, [in] VARIANT Column, [in] VARIANT Phi, [in] VARIANT Length1, [in] VARIANT Length2, [out] VARIANT* Distances)
VARIANT HXLDContX.DistRectangle2ContourPointsXld(
[in] Hlong ClippingEndPoints, [in] double Row, [in] double Column, [in] double Phi, [in] double Length1, [in] double Length2)
static void HOperatorSet.DistRectangle2ContourPointsXld(HObject contour, HTuple clippingEndPoints, HTuple row, HTuple column, HTuple phi, HTuple length1, HTuple length2, out HTuple distances)
HTuple HXLDCont.DistRectangle2ContourPointsXld(int clippingEndPoints, double row, double column, double phi, double length1, double length2)
dist_rectangle2_contour_points_xlddist_rectangle2_contour_points_xldDistRectangle2ContourPointsXlddist_rectangle2_contour_points_xldDistRectangle2ContourPointsXldDistRectangle2ContourPointsXld determines the Euclidean
distances between the points of a contour ContourContourContourContourContourcontour and a
rectangle of arbitrary orientation specified by the center
(RowRowRowRowRowrow, ColumnColumnColumnColumnColumncolumn), the orientation PhiPhiPhiPhiPhiphi, and
the half edge lengths Length1Length1Length1Length1Length1length1 and Length2Length2Length2Length2Length2length2. The
angle PhiPhiPhiPhiPhiphi must be given in radians and specifies the angle
between the horizontal axis and the edge with the half length
Length1Length1Length1Length1Length1length1 in the mathematically positive direction
(counterclockwise).
Depending on the processing used to create ContourContourContourContourContourcontour, the
start and end points of a contour may contain positional errors. In
this case, the operator fit_rectangle2_contour_xldfit_rectangle2_contour_xldFitRectangle2ContourXldfit_rectangle2_contour_xldFitRectangle2ContourXldFitRectangle2ContourXld is
typically called with the parameter ClippingEndPointsClippingEndPointsClippingEndPointsClippingEndPointsClippingEndPointsclippingEndPoints set
to a value greater than zero to exclude points at the beginning and
the end of the contour from the computation. To compute the
distances of the same set of points as used in the fitting process,
ClippingEndPointsClippingEndPointsClippingEndPointsClippingEndPointsClippingEndPointsclippingEndPoints should be set to the same value as in
fit_rectangle2_contour_xldfit_rectangle2_contour_xldFitRectangle2ContourXldfit_rectangle2_contour_xldFitRectangle2ContourXldFitRectangle2ContourXld.
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
Number of points at the beginning and the end of the
contours to be ignored for the computation of
distances.
Default value: 0
Suggested values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Restriction: ClippingEndPoints >= 0
Row coordinate of the center of the rectangle.
Column coordinate of the center of the rectangle.
Orientation of the main axis of the rectangle [rad].
First radius (half length) of the rectangle.
Restriction: Length1 > 0
Second radius (half width) of the rectangle.
Restriction: Length2 >= 0
Distances of the contour points to the rectangle.
dist_rectangle2_contour_points_xlddist_rectangle2_contour_points_xldDistRectangle2ContourPointsXlddist_rectangle2_contour_points_xldDistRectangle2ContourPointsXldDistRectangle2ContourPointsXld returns 2 (H_MSG_TRUE) if all
parameter values are correct. If necessary, an exception is
raised.
fit_rectangle2_contour_xldfit_rectangle2_contour_xldFitRectangle2ContourXldfit_rectangle2_contour_xldFitRectangle2ContourXldFitRectangle2ContourXld
Foundation