get_metrology_model_paramget_metrology_model_paramGetMetrologyModelParamget_metrology_model_paramGetMetrologyModelParamGetMetrologyModelParam (Operator)

Name

get_metrology_model_paramget_metrology_model_paramGetMetrologyModelParamget_metrology_model_paramGetMetrologyModelParamGetMetrologyModelParam — Get parameters that are valid for the entire metrology model.

Signature

Description

get_metrology_model_paramget_metrology_model_paramGetMetrologyModelParamget_metrology_model_paramGetMetrologyModelParamGetMetrologyModelParam queries parameters that are valid for the entire metrology model. The metrology model is defined by the handle MetrologyHandleMetrologyHandleMetrologyHandleMetrologyHandleMetrologyHandlemetrologyHandle.

The following generic parameter names for GenParamNameGenParamNameGenParamNameGenParamNameGenParamNamegenParamName are possible:

'camera_param'"camera_param""camera_param""camera_param""camera_param""camera_param":

The internal camera parameters that are set for the metrology model.

'plane_pose'"plane_pose""plane_pose""plane_pose""plane_pose""plane_pose":

The 3D pose of the measurement plane that is set for the metrology model. The 3D pose is given in camera coordinates.

'reference_system'"reference_system""reference_system""reference_system""reference_system""reference_system":

The rotation and translation of the current reference coordinate system with respect to the image coordinate system. The tuple returned in GenParamValueGenParamValueGenParamValueGenParamValueGenParamValuegenParamValue contains [row, column, angle].

'scale'"scale""scale""scale""scale""scale":

The scaling factor or unit of the results of the measurement returned by get_metrology_object_resultget_metrology_object_resultGetMetrologyObjectResultget_metrology_object_resultGetMetrologyObjectResultGetMetrologyObjectResult.

Parallelization

• Multithreading type: reentrant (runs in parallel with non-exclusive operators).
• Multithreading scope: global (may be called from any thread).
• Processed without parallelization.

Parameters

Result

If the parameters are valid, the operator get_metrology_model_paramget_metrology_model_paramGetMetrologyModelParamget_metrology_model_paramGetMetrologyModelParamGetMetrologyModelParam returns the value 2 (H_MSG_TRUE). If necessary, an exception is raised.

Possible Predecessors

get_metrology_object_indicesget_metrology_object_indicesGetMetrologyObjectIndicesget_metrology_object_indicesGetMetrologyObjectIndicesGetMetrologyObjectIndices, set_metrology_model_paramset_metrology_model_paramSetMetrologyModelParamset_metrology_model_paramSetMetrologyModelParamSetMetrologyModelParam

Possible Successors

get_metrology_object_paramget_metrology_object_paramGetMetrologyObjectParamget_metrology_object_paramGetMetrologyObjectParamGetMetrologyObjectParam

See also

get_metrology_object_paramget_metrology_object_paramGetMetrologyObjectParamget_metrology_object_paramGetMetrologyObjectParamGetMetrologyObjectParam, get_metrology_object_num_instancesget_metrology_object_num_instancesGetMetrologyObjectNumInstancesget_metrology_object_num_instancesGetMetrologyObjectNumInstancesGetMetrologyObjectNumInstances

Module

2D Metrology