local_max_contours_xld — Select XLD contours with a local maximum of gray values.
local_max_contours_xld selects XLD contours from the contours passed in Contours, which have a local maximum in gray values across the direction of the contour. In order to be selected, at least MinPercent of the contour points must have a local maximum perpendicular to the direction of the contour. The contours' direction is determined by fitting a regression line through five neighboring points of the contour. In order to decide whether there is a local maximum for a contour point, a gray value profile that is Distance points wide and perpendicular to the contour is computed on both sides of the contour. If the gray value at the contour point is at least MinDiff larger than the gray value at at least one point on each side of the profile, the contour point is labeled as a local maximum. The selected contours are returned in LocalMaxContours.
XLD contours to be examined.
Corresponding gray value image.
Minimum percentage of maximum points.
Default value: 70
Suggested values: 60, 70, 75, 80, 85, 90, 95
Restriction: 0.0 <= MinPercent && MinPercent <= 100.0
Minimum amount by which the gray value at the maximum must be larger than in the profile.
Default value: 15
Suggested values: 5, 8, 10, 12, 15, 20
Restriction: 0 <= MinDiff && MinDiff <= 255
Maximum width of profile used to check for maxima.
Default value: 4
Suggested values: 2, 3, 4, 5, 6
Restriction: Distance >= 1
gen_contours_skeleton_xld, lines_gauss, lines_facet, edges_sub_pix