Name
write_lutwrite_lutWriteLutwrite_lutWriteLutWriteLut — Write look-up-table (lut) as file.
write_lutwrite_lutWriteLutwrite_lutWriteLutWriteLut saves the look-up-table (resp. the part of it that
is relevant for displaying image gray values) of the valid output
window into a file named 'FileNameFileNameFileNameFileNameFileNamefileName.lut'. It can be read again
later with set_lutset_lutSetLutset_lutSetLutSetLut.
write_lutwrite_lutWriteLutwrite_lutWriteLutWriteLut is only suitable for systems using 256 colors.
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
File name (of file containing the look-up-table).
Default value:
'/tmp/lut'
"/tmp/lut"
"/tmp/lut"
"/tmp/lut"
"/tmp/lut"
"/tmp/lut"
File extension: .lut
read_image(Image,'monkey')
dev_display(Image)
draw_lut(WindowHandle)
write_lut(WindowHandle,'test_lut')
read_image(&Image,"monkey") ;
disp_image(Image,WindowHandle) ;
draw_lut(WindowHandle) ;
write_lut(WindowHandle,"test_lut") ;
read_image(Image,'monkey')
dev_display(Image)
draw_lut(WindowHandle)
write_lut(WindowHandle,'test_lut')
read_image(Image,'monkey')
dev_display(Image)
draw_lut(WindowHandle)
write_lut(WindowHandle,'test_lut')
read_image(Image,'monkey')
dev_display(Image)
draw_lut(WindowHandle)
write_lut(WindowHandle,'test_lut')
read_image(Image,'monkey')
dev_display(Image)
draw_lut(WindowHandle)
write_lut(WindowHandle,'test_lut')
write_lutwrite_lutWriteLutwrite_lutWriteLutWriteLut returns 2 (H_MSG_TRUE) if the window with the required
properties (256 colors) is valid and the parameter (file name) is
correct. Otherwise an exception is raised.
set_lutset_lutSetLutset_lutSetLutSetLut
set_lutset_lutSetLutset_lutSetLutSetLut,
set_pixelset_pixelSetPixelset_pixelSetPixelSetPixel,
get_pixelget_pixelGetPixelget_pixelGetPixelGetPixel
Foundation