Operators

# circularity (Operator)

## Name

circularity — Shape factor for the circularity (similarity to a circle) of a region.

## Signature

circularity(Regions : : : Circularity)

## Description

The operator circularity calculates the similarity of the input region with a circle.

Calculation:

If F is the area of the region and max is the maximum distance from the center to all contour pixels, the shape factor C is defined as:

C = min(1,C')

The shape factor C of a circle is 1. If the region is long or has holes, C is smaller than 1. The operator circularity especially responds to large bulges, holes and unconnected regions. The value of C is clipped to 1.0, because the pixel area of a region can only be an approximation of a real circle's area. This approximation error is bigger for small regions than for large regions.

In the documentation of the operator region_features, you can find an image illustrating regions which vary in their circularity.

In case of an empty region the operator circularity returns the value 0 (if no other behavior was set (see set_system)). If more than one region is passed the numerical values of the shape factor are stored in a tuple, the position of a value in the tuple corresponding to the position of the region in the input tuple.

## Parallelization

• Multithreading type: reentrant (runs in parallel with non-exclusive operators).
• Automatically parallelized on tuple level.

## Parameters

Regions (input_object)  region(-array) object

Region(s) to be examined.

Circularity (output_control)  real(-array) (real)

Circularity of the input region(s).

Assertion: 0 <= Circularity && Circularity <= 1.0

## Example (HDevelop)

```* Comparison between shape factors of rectangle, circle and ellipse:
gen_rectangle1(R1,10,10,20,20)
gen_rectangle2(R2,100,100,0.0,100,20)
gen_ellipse(E100,100,100,0.0,100,20)
gen_circle(C,100,100,20)
circularity(R1,M_R1)
circularity(R2,M_R2)
circularity(E100,M_E)
circularity(C,M_C)
fnew_line(FileId)
fwrite_string(FileId,['rectangle: ',M_R2])
fnew_line(FileId)
fwrite_string(FileId,['ellipse:   ',M_E])
fnew_line(FileId)
fwrite_string(FileId,['circle:    ',M_C])
fnew_line(FileId)
```

## Result

The operator circularity returns the value 2 (H_MSG_TRUE) if the input is not empty. The behavior in case of empty input (no input regions available) is set via the operator set_system('no_object_result',<Result>). The behavior in case of empty region (the region is the empty set) is set via set_system('empty_region_result',<Result>). If necessary an exception is raised.