Write Access

This widget allows you to control the write access when using MERLIC in the process integration mode. If MERLIC is running in the process integration mode, the control over MERLIC is granted to the connected communication device or industrial control system. Therefore, no user interactions are possible by default. To enable the user to acquire the write access to your MERLIC Vision App in the Frontend during the process integration mode, you can add this widget to your Frontend design. For more information, see Write Access in the Frontend.

Style

X, Y:

Adjust the position of the widget by typing the desired coordinate values of the upper left corner into the input field.

Z-Order:

Adjust the z-order of the widget by typing the desired value into the input field. This defines which widget is displayed on top if several widgets are positioned at the same place, for example, if widget "A" has "Z-Order" "0" and widget "B" has "Z-Order" "1", widget "B" will be displayed on top of widget "A".

Width:

Adjust the width of the widget. The width is defined in pixels and set to 80 by default. To change the value, type the new width into the input field. It must be at least 40 and not be bigger than 2147483647.

Height:

Adjust the height of the widget. The height is defined in pixels and set to 40 by default. To change the value, type the new height into the input field. It must be at least 20 and not be bigger than 2147483647.

Background Color On:

Adjust the background color of the widget for the case that the write access is activated in the Frontend. To change the color, click into the color field and select a new color in the color selection dialog or enter the color code manually.

Background Color Off:

Adjust the background color of the widget for the case that the write access is deactivated in the Frontend. To change the color, click into the color field and select a new color in the color selection dialog or enter the color code manually.

Handle Color:

Adjust the color of the button handle. To change the color, click into the color field and select a new color in the color selection dialog or enter the color code manually.