Success Stories

Dr. Alberto Tellaeche of the Tekniker Foundation Technological Center has developed an automated system to inspect percussion caps at rates as fast as 216,000 units/hour. The Centro Tecnológico…

GigE camera, special oven, and image-processing algorithms test snap point of bimetal disks. Fig. 1: Bimetal disks in this array stretch as they are heated, a process called 'creep.' When the disk…

In its coffee capsule filling systems, Optima incorporates machine-vision systems from Seidenader Automation that use two GigE and four USB cameras to check the capsules before filling and to ensure…

Figure 1: Photocells provide triggering for the two AVT FireWire cameras in the Radine/Data Vision system. FireWire cameras, LED lighting, and software check for defects on plastic rings used to…

Robotic apple picker relies on a camera inside the gripper and off-the-shelf software. Fig. 1: Horizontal 2-D stabilization of the AFP In response to Belgian farmers' problem to find reliable seasonal…

Fig. 1: PrOMT.stereo camera system with a small calibration body for a volume of interest of 0.1 liter (on top of the blue aluminium box) Stereo camera system eases highly precise measurement If one…

Diagram – kindly provided by Vision Systems Design Magazine To inspect tens of thousands containers an hour, is a challenge that faced up the German beverage industry specialist BBULL TECHNOLOGY.…

Sony EMCS Corporation Kohda TEC is the leading manufacturer of electronic boards inspection systems in the world, and part of Sony, Japan. With products becoming more and more compact and lightweight…

The measuring of cutting edge radius and the part angle of an indexable insert. In this case, subpixel accurate edge extraction algorithms are used. Since more than 15 years, ROBOWORKER Automation…